Heat & Glo LifeStyle DAKOTA 42H owner manual Operating Instructions, Before Lighting Appliance

Page 18

10 Operating Instructions

A. Before Lighting Appliance

Before operating this appliance, have a qualified technician:

Remove all shipping materials from inside and/or underneath the fi rebox.

Review proper placement of logs, rockwool, lava rock and vermiculite.

Check the wiring.

Check the air shutter adjustment.

Ensure that there are no gas leaks.

Ensure that the fl ow of combustion and ventilation air is not obstructed (front grilles).

WARNING

Fire Risk

Burn Risk

HOT! DO NOT TOUCH.

SEVERE BURNS MAY RESULT.

CLOTHING IGNITION MAY RESULT

Glass and other surfaces are hot during operation and cool down.

Keep children away.

CAREFULLY SUPERVISE children in same room as appliance.

Alert children and adults to hazards of high temperatures.

Do NOT operate with protective barriers open or removed.

Keep clothing, furniture, draperies and other combustibles away.

WARNING

Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Refer to the owner’s information manual provided with this appliance. For assistance or additional information consult a qualifi ed installer, service agency or the gas supplier.

WARNING

Do NOT use this appliance if any part has been under water. Immediately call a qualifi ed service technician to inspect the appliance and to replace any part of the control system and any gas control which has been under water.

18

Heat-N-Glo Lifestyle Collection • Dakota 42/Dakota 42H • 4036-905 Rev I • 10/05

Image 18
Contents Models Dakota Dakota 42H What to do if you smell gasHomeowner Reference Information Listing Label Information/LocationTable of Contents Appliance Certification High Altitude InstallationsListing and Code Approvals Glass SpecificationsInspect Appliance and Components Design and Installation ConsiderationsGetting Started Tools and Supplies NeededFraming and Clearances Select Appliance LocationFire Risk Clearances Mantel ProjectionsFire Risk Odor Risk FP = Fireplace Opening X = AIR Supply Inlet Appliance Preparation Remove Logs, Ember Bed and Shipping CoverSecuring and Leveling Appliance Gas Pressure Gas InformationFuel Conversion Gas Connection Fire Risk Explosion RiskFire Risk Explosion Risk Asphyxiation Risk Valve Access Loosen Refractory Retaining StripCSA C22.1 Recommendation for WireElectrical Information Shock Risk Explosion RiskFinishing Facing MaterialAccessories Appliance SetupClean the Appliance Remove the Shipping MaterialsPositioning the Logs Rear LogGlass Assembly Grilles and TrimGlass Specifications Before operating this appliance, have a qualified technician Operating InstructionsBefore Lighting Appliance Fire Risk Burn RiskLighting the Appliance Intellifire IgnitionFire Risk High Temperatures Frequently Asked QuestionsInitial Break-in Procedure Issue SolutionsTroubleshooting Symptom Possible Causes Corrective ActionsIntellifire Ignition System Maintaining and Servicing the Appliance Valve Service and Replacement Tools RequiredOrifice Tube Pilot Tube Maintenance and Service Tasks Inspect Maintenance TasksAppliance Dimension Diagram Reference MaterialsThis page intentionally left blank This page intentionally left blank This page intentionally left blank This page intentionally left blank Warranty for HEAT-N-GLO Fireplaces WarrantyContact Information