Vermont Casting ODSR36A, ODSR42A manual Safety Information

Page 3

Majestic Fireplaces® ODSR Series "A"

Safety Information

PLEASE READ THIS MANUAL BEFORE INSTALLING AND USING FIREPLACE.

IMPORTANT: Read all instructions and warnings carefully before starting installation. Failure to follow these instruc- tions may result in a possible fire hazard and will void the warranty.

NOTE: These units are intended for outdoor use in the United States and Canada using the 'SK' chimney sys- tem. These units may also be used outdoors in the United States and Canada using the 'S' chimney system with an adapter. These units may also be used indoors.

Description

The ODSR Series "A" fireplaces are clean-faced, solid

fuel, woodburning fireplaces.

Precautions

Majestic Fireplaces and component parts have been highly tested and will operate safely when installed in accordance with instructions provided in this manual. Carefully read and understand all instructions before beginning installation.

If you notice any damage to fireplace or component parts, immediately report damage to your Majestic Fireplaces dealer.

Only use CFM Corporation components or the warranty will be voided and a fire hazard may be created.

CFM Corporation warranty will be voided by and CFM Corporation disclaims any responsibility for the following actions:

•Installation of any damaged fireplace or chimney component;

•Modification of fireplace, chimney assembly or any component parts thereof; (except for chase flashings as detailed in CFM Corporation Chimney Top instal- lation instructions).

•Installation other than as instructed by CFM Corpora- tion; or

•Installation and/or use of any component part not manufactured or approved by CFM Corporation in combination or assembly with a CFM Corporation fireplace system, notwithstanding any independent testing laboratory or other third party approval of such component parts or accessory.

Any such action may possibly cause a fire hazard.

Consult local building codes to ensure that you are in compliance before installing the fireplace.

Fireplaces must be vented to the out-of-doors.

WARNING: To avoid the risk of damaging fireplace materials and increasing the risk of spreading a fire, do not use the fireplace to cook or warm food.

Do not obstruct or modify air inlets/outlets in any manner.

Do not install combustible materials on any of the fireplace surround.

Burn only solid wood fuel or gas logs.

Do not install a solid fuel burning insert or other products not specified for use with this fireplace.

These fireplaces are not approved for installation in mobile homes.

This fireplace is not designed to be water tight. Therefore, when installing this unit against an exte- rior wall, the wall must be finished before setting unit in place.

Proposition 65 Warning: Fuels used in gas, wood- burning or oil fired appliances, and the products of combustion of such fuels, contain chemicals known to the State of California to cause cancer, birth defects and other reproductive harm.

California Health & Safety Code Sec. 25249.6

Drafts

The fireplace should not be located in areas that create drafts (ie: frequently opened doors and central heating air inlets/outlets) that hamper the normal flow of air into the fire.

Gas Logs

If you plan to install a gas log, the gas line should be installed before framing the fireplace. The gas line must be installed by a certified gas line installer.

Cleaning

There are three methods of cleaning the polished stain- less steel of your outdoor fireplace;

1.Warm, soapy water - to loosen any dirt film

2.Glass cleaner with ammonia

3.Stainless steel cleaner available at hardware stores

Regardless of which method is used, remember that any- thing with too much abrasive may dull the finish.

20006811

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Odsr Series a Table of Contents Safety Information ODSR36A Series Woodburning Fireplace Chase Installation Chimney Requirements Offset Installations Ten Foot Rule Planning InformationMounting the Fireplace Planning the Chimney RunInsulating Fireplace Enclosure For Cold Climates InstallationChase Installation Chimney SupportsFraming Chimney SetupStraight-Up Chimney Installation Offset InstallationAngle of Chimney at Ceiling Positioning, Safety Strips Securing the FireplaceCutting the Hole Framing the Ceiling HoleInstalling the Firestop Spacer Ceiling Hole Installing Outside Air KitInstalling the Chimney System Proper Firestop Spacer InstallationLocate Chimney Centerpoint On Roof Continue Installing Pipe to Complete RunAdditional Ceilings Penetrating the RoofFinishing Install Remainder of Chimney SectionsInstalling Top Housing or Termination Installing Chimney In a ChaseMantel clearances Hearth Installation Side Wall ProtectionExamples of wall shield insulation Example of Determining Hearth Extension Equiva- lents Example for Common BrickSide View Fireplace Top View Installing Line for Gas LogsItem/Model Number ODSR36A/42A Outdoor Woodburning FireplaceAccessory Description Model Number AccessoriesComponent Description Model Number Chimney ComponentsChimney Components Canada Majestic Fireplaces Odsr Series a Limited Warranty & 30 Year Protection Plan CFM Corporation

ODSR42A, ODSR36A specifications

Vermont Castings has long been renowned for producing high-quality, efficient, and aesthetically pleasing heating solutions. The ODSR36A and ODSR42A gas fireplaces represent the epitome of this legacy, combining advanced technology and design to enhance any living space.

One of the standout features of both models is their exceptional heating capabilities. The ODSR36A offers a maximum input of approximately 36,000 BTUs, while the ODSR42A boasts an impressive 42,000 BTUs. This ensures that they can effectively heat spaces of various sizes, making them suitable for both small and large rooms.

The design of these fireplaces is another notable characteristic. Both models come with a classic cast iron finish that provides a timeless aesthetic to any home. The large viewing area offered by the expansive glass doors invites warmth and ambiance into the room, allowing users to enjoy the beauty of the flames without the hassle of traditional wood-burning fireplaces.

Efficiency is paramount for modern consumers, and both the ODSR36A and ODSR42A excel in this department. With a remarkable thermal efficiency rating, these models ensure that more heat is produced from less fuel, translating into cost savings over time. Additionally, the convenience of gas operation eliminates the need for wood storage, ashes, and the cleanup associated with traditional fireplaces.

Safety and user-friendliness are also integrated into the design of the ODSR series. Both models are equipped with pilot ignition systems, simplifying the lighting process. Moreover, they come with advanced safety features such as a safety shut-off mechanism, which automatically activates in case of gas leaks, ensuring peace of mind for users.

The ODSR36A and ODSR42A also offer customizable options to suit different tastes and home styles. Choices include a variety of trims and decorative elements, allowing homeowners to create a fireplace that matches their décor.

With quiet operation, quick heat-up times, and minimal emissions, the Vermont Castings ODSR36A and ODSR42A stand out as top choices for those seeking the perfect combination of style, efficiency, and technological innovation in their home heating solutions. These fireplaces not only serve as functional heating units but also as beautiful focal points that enhance the comfort and charm of any living space.
Top Page Image Contents