Heavy Duty Rotisserie Assembly
Instructions
Tools required for assembly:
Adjustable wrench or pliers and either a Flat Head or Phillips Head Screwdriver.
Pre-Assembly Instructions
Before assembling your Rotisserie, use the parts list below to check that all necessary parts have been included. Inspect parts for damage as you proceed. Do not assemble or operate
your Rotisserie if it appears damaged. If you are missinq parts or have questions durinq the
assembly process, call
141.158033
KEY | PART |
| DESCRIPTION |
| PART # | QTY | |||
1 | Motor | Bracket |
|
| P03307002G | 1 | |||
2 | UNC | Phillips Head Screws | $112G10124 | 2 | |||||
3 | UNC | Hex | Nut |
| $362G10124 | 2 | |||
4 | Plain | Washer | 3/16" |
| $411G03084 | 2 | |||
5 | Chrome | Spit: For 4 and 5 Burner | P05508164F | 1 | |||||
6.5" Extension | Chrome Spit: For 5 Burner Gas Grill | P05508166F | 1 | ||||||
| |||||||||
6 | Holding | Forks |
|
| P05508031A | 2 | |||
7 | Thumbscrews | 1/4"x 1/2" | $196G04081 | 2 | |||||
8 | Collar |
|
|
|
|
| P05508032F | 1 | |
9 | Bushing |
|
|
| P05508033F | 1 | |||
10 | P,C Rotisserie | Motor |
| P07101025A | 1 | ||||
11 | Thumbscrews | 10x1/2" |
| $196G10084 | 1 | ||||
12 | Spring | Washer | for 6.5" | Extension Spit | $431G04064 | 1 | |||
13 | Extension | Bracket |
| P03308008C | 1 | ||||
14 | Phillips | Head | Screws | 3/8"x1/2" | $112G06084 | 2 | |||
15 | Phillips | Head | Screws | 3/16"x7/8" | $112G03144 | 2 | |||
16 | Plain | Washer | 3/16" |
| $411G03084 | 2 | |||
17 | UNC Hex Nut |
| $362G10124 | 2 |
UNC Phillips | Head | Thumbscrews | Thumbscrews |
Screws | 1/4"xl/2" | 10xl/2" | |
KEY #2 |
| KEY #7 | KEY #11 |
Phillips Head Screws | Phillips Head Screws |
3/8"xl/2" | 3/16"x7/8" |
KEY #14 | KEY #15 |
Extension Bracket
KEY #13
If your grill lid overlaps the side of the grill bowl where you would normally mount the rotisserie
mounting bracket, simply add extension bracket P03308008C to the side of your grill bowl and then mount the rotisserie mounting bracket to this extension bracket. See Page 3, Figure 2