Kenmore 141.158033 manual Assembling The Motor Bracket, Assembling The Rotisserie

Page 4

Assembling The Motor Bracket

Attach the Motor Bracket on the outside of the left grill bowl panel. Align the two holes of the

Bracket with the holes on the grill bowl. Tighten securely using two #10-24 x 3/4" UNC screws, washers and nuts provided. (See fig. 1).

For some Kenmora grills with lid side panels that ovedap grill bowl side panels (See fig. 2) Attach Extension Bracket on the outside of the lef_ grill bowl panel. Align the two holes of the bracket with the holes on the grill bowl. Tighten securely using two Phillips Head Screws 3/16"x7/8", washer and nuts provided. Then attach the Motor Bracket to the Extension Bracket using two Phillips Head

Screws 3/8"xl/2"

and tighten securely.

Fig 1.

Fig 2.

 

13 Extension

 

Bracket

14

1

Outside of left grill bowl panel_

2

15

0

Outside of left

gdll bowl panel

Assembling The Rotisserie

Slide the Spit through the piece of meat or poultry and the Holding Forks onto each end of

the Rotisserie Spit. Adjust spacing between Skewers to accommodate your food, then tighten

the Thumbscrews to keep the Food Skewers in position. Slide the Collar and Bushing onto the

threaded end of the Spit. Do not tighten the Collar Thumbscrew until the Rotisserie is placed into your grill.

5

7

11

9

7

8

Image 4
Contents Operators Manual ModelKeep this Operators Manual for Future Reference Pre-Assembly Instructions 141.158033Assembling The Motor Bracket Assembling The RotisserieInstalling The Rotisserie Motor Installing The Rotisserie Bushinq and collar must always be used with this Rotisserie