Char-Broil 10201630 manual Smokestack Smokestack receiver Smoke chamber

Page 11

7

Attach smokestack to end of smoke chamber by sliding stack into smokestack receiver. While holding the smokestack in a vertical position, tighten the 3/8-16x3/4”hex-head bolt in the nut that is welded to the smokestack receiver.

Smokestack

Smokestack receiver

Smoke chamber

To attach damper to firebox side door, place one 1/4” flat washer onto one 1/4-20x3/4”hex-head bolt. Insert the bolt into the

8 center hole of the firebox side door, from the outside. Place the handle of the damper through the lower opening in the door from the inside and place the center hole in the damper over the bolt. Place another 1/4” flat washer onto the bolt and secure with a 1/4” lock nut. Do not over-tighten lock nut. Damper should be able to move freely. Slide door latch behind door catch to keep firebox door closed.

Firebox

Side door

Door latch

Damper

Image 11
Contents Carbon Monoxide Hazard Product Guide Model Longhorn SmokerWash your hands after handling this product Table of ContentsPreparing and Using Your Smoker Heat of the Coals Cooking TipsGrill Maintenance Most Surfaces on this Unit are HOT When in USEItems Manufacturer will not PAY for Limited WarrantyDescription Parts ListAssembly Hitch pin Wheel Flat washer Axle Short leg Wood rack Smokestack Smokestack receiver Smoke chamber Handle bracket Hitch pin Handle rod Temperature gauge Slide ash pan into ash Pan guides Page Regtemp REV00