Char-Broil 10201598 manual Firebox Fire Grate Smoker Chamber

Page 12

9

•Attach shelf support to side of smoker chamber with one #10-24 X 1/2” machine screw where screw is going through inside of chamber through hole of support and secured with one #10-24flange nut.

•Lay side shelf on top of other end of shelf support so that it fits inside holding bracket.

•Secure side shelf to smoker chamber using two #10-24 X 1/2”screws and two #10-24flanged nuts.

Fully tighten all screws and nuts.

Nut Shelf

Support

Smoker

ScrewChamber

Holding

Bracket

Screw through inside Smoker Chamber

Smoker

Chamber

Lid

Smoker

Chamber

Nut

10

•Place a fire grate into the bottom of the firebox. Remaining fire grates may be placed in the bottom of the smoker chamber, if desired.

•The height of the grate can be adjusted by turning it 90 degrees.

Firebox

Fire Grate

Smoker

Chamber

Page 12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Hondo Jr. Smoker Table of Contents Wash your hands after handling this productUsda Recommended Vegetables MesquiteCooking Tips Building Your FireGrill Maintenance Limited Warranty Items Manufacturer will not PAY forParts List KeyDescription Key DescriptionAssembly Leg Brace SupportsHitch Pin WheelAxle Wheel Legs with holes AxlePlace unit in upright position Fully tighten all screws and nutsRepeat on firebox door Firebox Fire Grate Smoker Chamber Firebox Cook Grate Smoker Chamber Cook Grates Hardware List Hardware not shown actual sizePage Warranty Registration Department Box Columbus, GA
Top Page Image Contents