Centro G50205 warranty G H T I N G E G R I L L, R N I N G If the Selected Burner does not Light

Page 8

[CEN 025] G50205 BBQ Manual E 11/4/05 6:54 PM Page 6

L I G H T I N G

T H E G R I L L

Make Sure you have followed all the safety checks, procedures and instructions indicated in the previous section, before attempting to light the grill.

Lighting The Main Burners

1.Always open the hood completely and always inspect the grill and burners to confirm that all components are properly positioned before lighting the main burners.

W A R N I N G

Never stand with your head directly over the Barbecue when preparing

to light the main burners, to prevent possible bodily injury.

2.Always confirm that all of the burner control knobs are in the OFF position before opening the gas supply.

3.Slowly turn on the propane gas supply valve at the tank 1-2 turns.

4.Wait approximately 5 seconds before turning the selected burner control to the HIGH position by pushing down on the knob and turning it counter-clockwise. This procedure allows pressure to stabilize, and prevents the flow limiting feature from being activated.

5.Immediately turn the Rotary Ignitor knob clockwise. As you turn the ignitor you will hear a click as the Piexo module generates an ignition spark to the burner. Rotate the ignitor knob until the burner lights. The selected burner should light within 5 seconds. Light the burners sequentially from left to right.

W A R N I N G

IF THE SELECTED BURNER DOES NOT LIGHT,

immediately turn the burner control knob and cylinder valve to the OFF

position, to prevent gas buildup. Wait five minutes for the gas to

clear and then repeat the preceding starting procedure. IF the burner will not light when using the Ignitor, follow the match lighting instructions.

6

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Serial # B L E O F C O N T E N T S E O F L P G a S C Y L I N D E R Installation I N F O R M a T I O ND I T I O N a L R N I N G S L L I N G T H E L P C Y L I N D E R Cylinder must also be equipped withTo Avoid Unnecessary Risks I O R T O U S I N G Hose and Regulator InspectionF E T Y H O S E D R E G U L a T O R To Reset The Gas Regulator Safety Device F E T Y A K T E S T I N GPerform a Leak Test Following Must Be CheckedG H T I N G E G R I L L R N I N G If the Selected Burner does not LightTurning The Burners Off Match Lighting The Main BurnersLighting the Second Burner Lighting the Side BurnerLighting the Side Burner with a Match Shutting Down the Barbecue After UseMatch Lighting P S O N U S I N G U R R O T I S S E R I EGuide to Rotisserie Cooking Balancing the FoodItem No Quantity Specification R T S L I S T I N G F O R1 1 0 2 P R O P a N E G 5 0 2 0 1 1 0 6 2 N a T U R a L G a S G 5 0 2 0 1 1 0 6 2 N a T U R a L G a S G 5 0 2 0 Hardware Pack List Tools Needed for AssemblyS E M B L Y I N S T R U C T I O N S CEN 025 G50205 BBQ Manual E 11/4/05 654 PM Place the top lid and burner box assembly A+B onto the cart CE + CF CEN 025 G50205 BBQ Manual E 11/4/05 654 PM For propane model only #85-1102 Connecting to Gas Line Disconnecting From Gas LineF O R M a T I O N O N T U R a L G a S M O D E L Natural Gas Supply ConnectionS T R I B U T O R CEN 025 G50205 BBQ Manual E 11/4/05 654 PM
Top Page Image Contents