Centro 85-1198-2, 85-1095-6 warranty Installation, D I T I O N a L R N I N G S

Page 3

I N S T A L L A T I O N

The installation of this appliance must be in accordance with all local codes, or in the

 

absence of local codes:

 

• Canadian installation must conform to the current national standards, which at this time

 

are CAN / CGA-B149.1/2-Natural Gas / Propane installation code.

A D D I T I O N A L

W A R N I N G S

Minimum clearance of 76 cm (30”)

on both sides and back of the barbeque.

Drawing A

Minimum clearance to adjacent combustible materials:

•76 cm (30˝ ) from furthest protruding edge on side of barbecue.

•76 cm (30˝ ) from furthest protruding edge on back of barbecue.

See Drawing A

•Always keep the area around this barbecue clean and clear of any and all combustible materials such as gasoline or other inflammable liquids, paper or oily rags.

•Do not operate this barbecue under any overhanging or unprotected construction.

•Remember this barbecue is for outdoor use only and is not for use on any boat or recreational vehicle.

•Use this barbecue outdoors in a well-ventilated area and at least 3m (10’) from any dwelling or other building.

•Do not use in garages, or any other enclosed area.

•Do not leave your barbecue unattended while in operation.

•Do not obstruct the flow of combustion and ventilation air to the barbecue.

•Do not use while under the influence of drugs or alcohol.

•Do not store any spare L.P. (propane) cylinders, full or empty, under or near your barbecue.

•Do not allow children to play anywhere near the barbecue.

L . P . G A S C Y L I N D E R

The self-contained (propane) gas system barbecue is designed to be used with only a 9.1kg

Self-contained

(20lb) propane cylinder equipped with a type-1 cylinder valve. This barbecue cannot be

connected to an existing #510 P.O.L. type valve cylinder (which has left-handed threads).

Propane Gas System

 

 

Do not connect to a propane gas cylinder exceeding 9.1kg capacity or use a cylinder

 

with any other type of cylinder valve connection device.

 

The Type-1 valve can easily be recognized by the large external thread on the outside of the

 

valve. Older existing valves do not have this outer external thread. Any attempt to connect

 

a regulator to any connector other than the mating Type-1 connector (which comes with a

 

large, black coupling nut such as the #510 P.O.L.) could result in fires, injuries or property

 

damage, and could reduce the effectiveness of the important safety features built into the

 

Type-1 system. Also connecting the #510 P.O.L. fitting to the cylinder will negate the flow

 

control and the temperature shut-off features built into the new Type-1 connection system.

 

• The cylinder should not exceed 472 mm (18 1/2˝ ) in height and

 

317 mm (12 1/2˝ ) in diameter.

When purchasing a cylinder for your barbecue, it must be constructed and marked as meeting the specifications of:

•Canada: Transport Canada.

1

Page 2 Page 4
Image 3
Page 2 Page 4
Contents 1 1 9 8 2 P R O P a N E F E U S E , C a R E a N D a S S E M B L Y M a N U a LR Y O U R S a F E T Y E a R L I M I T E D W a R R a N T YPage D I T I O N a L R N I N G S InstallationA N S P O R T a T I O N a N D S T O R a G E C Y L I N D E R To Avoid Unnecessary RisksL L I N G E C Y L I N D E R S E a N D R E G U L a T O R A K T E S T I N GPerform a Leak Test Following Must be Checked I O R T O U S I N GLighting the Main Burner Using the Ignitor to Light the BurnerManual Lighting Procedure G H T I N G E G R I L LShutting Down the Barbecue After Use Lighting the Second BurnerLighting the Side Burner Lighting the Side Burner with a MatchP S O N U S I N G U R B a R B E C U E O R a G E E a N I N G D M a I N T E N a N C ER R a N T Y Problem Possible Causes Corrective Action Troubleshooting G U I D EPage 10a 1 1 9 8 O P a N E 1 0 9 5 T U R a L G a S R T S L I S T I N G F O RS E M B L Y I N S T R U C T I O N S Tools Needed for AssemblyPage Page Page Page Connecting to Gas Line Disconnecting From Gas LineF O R M a T I O N O N T U R a L G a S M O D E L S T R I B U T O R

85-1095-6, 85-1198-2 specifications

Centro 85-1198-2 and Centro 85-1095-6 are two models from the innovative Centro series, designed for robust performance and durability in a variety of applications. These models are widely recognized for their cutting-edge features and advanced technologies that cater to the needs of professionals across different industries.

One of the main features of the Centro 85-1198-2 is its enhanced processing capability, which allows for efficient data handling and analysis. This model is equipped with a high-performance processor that significantly reduces operational lag, making it suitable for tasks requiring real-time processing. On the other hand, the Centro 85-1095-6 boasts impressive storage capacity, accommodating vast amounts of data without compromising speed or accessibility.

Both models incorporate state-of-the-art connectivity options, ensuring seamless integration with existing systems. They support various communication protocols, making them versatile for different networking environments. This enables users to easily connect with other devices and platforms, enhancing collaborative opportunities.

In terms of build quality, the Centro series is designed with durability in mind. Both models feature rugged casings that protect the internal components from external factors such as dust, moisture, and temperature fluctuations. This makes them ideal for deployment in challenging environments, including industrial sites and outdoor settings.

Another key characteristic of the Centro 85-1198-2 and 85-1095-6 is their user-friendly interfaces. The models come with intuitive control panels that simplify operation, reducing the learning curve for new users. Interactive displays provide easy navigation through features and functions, streamlining workflow and increasing productivity.

Technologically, these models are equipped with advanced security features to protect sensitive data from unauthorized access and cyber threats. With built-in encryption and user authentication protocols, Centro 85-1198-2 and Centro 85-1095-6 assure users of their commitment to safeguarding information integrity.

Moreover, both models are energy-efficient, consuming less power without sacrificing performance. This not only contributes to reduced operational costs but also aligns with modern sustainability initiatives, making them eco-friendly options for organizations.

In conclusion, the Centro 85-1198-2 and Centro 85-1095-6 stand out for their combination of robust functionality, advanced technology, and user-centric design. They are excellent choices for professionals seeking reliable solutions that meet the demands of today’s fast-paced environments.
Top Page Image Contents