Centro 85-1198-2, 85-1095-6 S E a N D R E G U L a T O R, A K T E S T I N G, Perform a Leak Test

Page 5

H O S E A N D R E G U L A T O R

Propane Gas Models: Your barbecue is designed to operate on L.P. (Propane) gas at a pressure of 2.74 Kpa (11˝ water column). A regulator preset to this pressure is supplied with the barbecue and must be used.

This regulator is equipped with the Type-1 quick-closing connecting system, which incor- porates these safety features:

•Will not allow gas to flow until a positive seal has been made.

•Has a thermal component that will automatically shut off the flow of gas between 115-150ºC (240-300ºF).

•Has a flow limiting feature, which will restrict the flow of gas to 10 cubic feet / hour.

Should the large, black thermal-sensitive coupling nut be exposed to any extreme temper- atures above 115ºC it will soften and allow the regulator probe to disengage from the valve, and will shut off the gas. Should this occur, do not try to reconnect the nut; instead replace the whole regulator assembly with a new one (see the attached parts listing for details). The regulator probe also contains a flow-sensitive feature, which limits the flow of gas to 10 cubic feet / hour, in the event of a regulator malfunction or hose leak. If the flow control feature is activated, the cause of this excessive gas flow should be investigated and corrected before using the barbecue again.

Note: Improperly lighting the barbecue can activate the flow control feature, resulting in lower heat output. If this occurs, the re-flow feature must be reset by turning all the burner controls and the cylinder valve off. Wait at least 30 seconds before slowly turning on the cylinder valve, and then after another 5 seconds turn the burner valve on and light the barbecue.

•Never connect this barbecue to an unregulated propane gas supply, or to another kind of gas. Do not alter or change the hose or regulator in any way.

•Visually inspect the whole hose assembly before each use for evidence of wear or damage such as cracks, burns, or even cuts. If any damage is found, replace the assembly before using the barbecue. Use only the recommended replacement hose.

•To avoid possible damage to the hose, do not allow any grease or other hot materials to fall on the hose, and make sure the hose does not contact any hot surfaces of the barbecue.

•The connection fitting must be protected when it’s disconnected from the cylinder. Do not allow the fitting to bump or drag on the ground as nicks and scratches could help create a leak when connecting back to the cylinder.

•It is important to do the “Leak Test” procedure every time a cylinder is refilled, or any of the components are changed, and especially at the beginning of a new season.

•Information on connecting Natural Gas Models is located at the end of the manual.

L E A K T E S T I N G

Perform a “Leak Test”

 

• Before lighting your barbecue for the first time.

 

• Every time the cylinder is refilled, or any component is replaced.

 

• At least once every year, preferably at the start of the season.

 

The “Leak Test” must be done outdoors, away from heat, open flames and flammable liquids.

 

Do not smoke while performing the test. Use only a mixture of 50/50 liquid soap and water

 

for leak testing. Never use a match or open flame.

3

Page 4 Page 6
Image 5
Page 4 Page 6
Contents R Y O U R S a F E T Y F E U S E , C a R E a N D a S S E M B L Y M a N U a LE a R L I M I T E D W a R R a N T Y 1 1 9 8 2 P R O P a N EPage D I T I O N a L R N I N G S InstallationL L I N G E C Y L I N D E R A N S P O R T a T I O N a N D S T O R a G E C Y L I N D E RTo Avoid Unnecessary Risks Perform a Leak Test S E a N D R E G U L a T O RA K T E S T I N G Following Must be Checked I O R T O U S I N GManual Lighting Procedure Using the Ignitor to Light the BurnerG H T I N G E G R I L L Lighting the Main BurnerLighting the Side Burner Lighting the Second BurnerLighting the Side Burner with a Match Shutting Down the Barbecue After UseP S O N U S I N G U R B a R B E C U E O R a G E E a N I N G D M a I N T E N a N C ER R a N T Y Problem Possible Causes Corrective Action Troubleshooting G U I D EPage 10a 1 1 9 8 O P a N E 1 0 9 5 T U R a L G a S R T S L I S T I N G F O RS E M B L Y I N S T R U C T I O N S Tools Needed for AssemblyPage Page Page Page F O R M a T I O N O N T U R a L G a S M O D E L Connecting to Gas LineDisconnecting From Gas Line S T R I B U T O R

85-1095-6, 85-1198-2 specifications

Centro 85-1198-2 and Centro 85-1095-6 are two models from the innovative Centro series, designed for robust performance and durability in a variety of applications. These models are widely recognized for their cutting-edge features and advanced technologies that cater to the needs of professionals across different industries.

One of the main features of the Centro 85-1198-2 is its enhanced processing capability, which allows for efficient data handling and analysis. This model is equipped with a high-performance processor that significantly reduces operational lag, making it suitable for tasks requiring real-time processing. On the other hand, the Centro 85-1095-6 boasts impressive storage capacity, accommodating vast amounts of data without compromising speed or accessibility.

Both models incorporate state-of-the-art connectivity options, ensuring seamless integration with existing systems. They support various communication protocols, making them versatile for different networking environments. This enables users to easily connect with other devices and platforms, enhancing collaborative opportunities.

In terms of build quality, the Centro series is designed with durability in mind. Both models feature rugged casings that protect the internal components from external factors such as dust, moisture, and temperature fluctuations. This makes them ideal for deployment in challenging environments, including industrial sites and outdoor settings.

Another key characteristic of the Centro 85-1198-2 and 85-1095-6 is their user-friendly interfaces. The models come with intuitive control panels that simplify operation, reducing the learning curve for new users. Interactive displays provide easy navigation through features and functions, streamlining workflow and increasing productivity.

Technologically, these models are equipped with advanced security features to protect sensitive data from unauthorized access and cyber threats. With built-in encryption and user authentication protocols, Centro 85-1198-2 and Centro 85-1095-6 assure users of their commitment to safeguarding information integrity.

Moreover, both models are energy-efficient, consuming less power without sacrificing performance. This not only contributes to reduced operational costs but also aligns with modern sustainability initiatives, making them eco-friendly options for organizations.

In conclusion, the Centro 85-1198-2 and Centro 85-1095-6 stand out for their combination of robust functionality, advanced technology, and user-centric design. They are excellent choices for professionals seeking reliable solutions that meet the demands of today’s fast-paced environments.
Top Page Image Contents