Then loosen but do not remove the upper two screws above the light.
7.Pull out the light bulb and replace with a new bulb. Tighten the four screws.
Note: Do not touch the halogen bulb with bare hands.
8.Replace glass cover, reinsert light bulb housing into the grill, and insert and tighten the screw.
Cleaning Method
Follow steps 1 through 4 above for glass cover removal. Use a damp towel to clean the surface of the glass cover. Make sure the glass cover is completely dry before
,/_ WARNING
Make sure the light switch is in the "OFF" position and the power plug is disconnected from the power outlet prior to cleaning the glass cover.
Z_ WARNING
The glass cover should not be in contact with water or any other liquid when it'swarm. Sudden change of temperature may cause cracks in the glass.
WARNING
To ensure continued protection against electric shock:
1.Connect to properly grounded outlets only.
2.Do not expose to rain.
3.Keep extension cord connections dry and off the ground.
Bulb Type: Halogen
Wattage: 10 watts per bulb
Voltage: 12 volts
rf you still have questions about replace bulb, call the Customer Service Helpline 8 AM - 5 PM
PST, Monday through Friday at 1-800-913-8999.
13