Manually Lighting Your Grill by Match

\WARNING

Never lean over the grill cooking area while lighting your gas grill. Keep your face and body a safe distance (at least 18 inches) from the cooking grid surface when lighting your grill by match.

1.Take the manual lighting stick

2.Insert a match into the lighting stick.

3.Follow steps 1 through 5 of the Basic Lighting Procedure.

4.Light the match and extend the lighting stick to cooking grid surface.

5.Turn the desired control knob to the HI/position setting to release gas. The burner should light immediately.

!WARNING

Should a "FLASH-BACK" fire occur in/or around the burner tubes, follow the instructions below. Failure to comply with these instructions could result in a fire or explosion that could cause serious bodily injury, death, or property damage.

•Shut off gas supply to the gas grill.

•Turn the control knobs to OFF position.

•Put out any flame with a proper fire extinguisher.

•Open grill lid.

•Once the grill has cooled down, clean the burner tubes and burners according to the cleaning instructions found on page 15.

If Grill Still Fails To Light

1.Check gas supply and connections for leaks. Check that all wire connections are secure.

2.Repeat basic lighting procedure. If your grill still fails to operate, turn the gas off at source, turn the control knobs to OFF, then check the following:

•Misalignment of burner tubes over orifices Correction: Reposition burner tubes over orifices.

•Obstruction in gas line

Correction: Remove fuel line from grill. Do not smoke! Open gas supply for 1 second to clear any obstruction from fuel line. Close off gas supply at source and reconnect fuel line to grill.

• Plugged orifice

Correction: Remove burners from grill, carefully lift each burner up and away from gas valve orifice. Remove the orifice from gas valve and gently clear any obstruction with a fine wire. Then reinstall all orifices, burners, and cooking components.

3.If an obstruction is suspected in gas valves, please call for repair service at 1-800-4-MY-HOME.

4.If the grill still does not light you may need to purge air from the gas line or reset the regulator excess gas flow device. Note: This procedure should be done every time a new LP gas tank is connected to your grill.

To purge air from your gas line and/or reset the regulator excess gas flow device:

•Turn the control knob to OFF position.

•Turn off the gas at the tank valve.

•Disconnect regulator from LP gas tank.

•Let unit stand for 5 minutes.

•Reconnect regulator to the LP gas tank.

•Turn the tank valve on slowly until 1¼to ½ open.

•Open the grill lid.

•Set control knobs to OFF. Push and turn any control knob to HIGH.

•Turn control knobs to HIGH until all the burners are lit

•You may start to use the grill

5.If all checks or corrections have been made and you still have questions about operating your gas grill, call the Customer Service Helpline 8 AM - 5 PM PST,

Monday through Friday at 1-800-913-8999

122.16643900, 640-082960815-7 specifications

The Kenmore 640-082960815-7,122.16643900 is a robust and versatile appliance designed to enhance the efficiency and comfort of the modern home. This model exemplifies Kenmore's commitment to quality, innovation, and user-friendly functionality.

One of the standout features of the Kenmore 640 is its energy efficiency. This appliance is designed to minimize power consumption while delivering high performance. With a focus on sustainability, it helps users reduce their utility bills without compromising on effectiveness. The use of advanced energy-saving technologies ensures that this model aligns with environmentally-friendly practices.

The Kenmore 640 boasts a user-friendly interface that simplifies operation for all users. The control panel is intuitive, featuring clearly labeled buttons and an easy-to-read display. This facilitates seamless navigation through various settings and modes, ensuring that users can adjust the appliance to suit their specific needs effortlessly.

Another defining characteristic of the Kenmore 640 is its robust construction, designed for durability and longevity. The materials used in the construction demonstrate a commitment to quality, ensuring that the appliance withstands the rigors of everyday use. This durability translates into reduced maintenance costs and extended product life, making it a smart investment for any household.

Equipped with advanced technologies, the Kenmore 640 offers exceptional performance in various tasks. Whether it's cooking, cleaning, or cooling, this appliance adapts to deliver optimal results. For example, its innovative heating elements provide even heat distribution, which is vital for consistent cooking outcomes. Similarly, its cooling features maintain precise temperature control, ensuring food preservation without fluctuation.

The appliance also incorporates smart technology, allowing for connectivity and remote access management. Users can leverage smartphone apps for monitoring and controlling settings, making it convenient to manage household tasks even when away from home. This level of connectivity elevates everyday convenience and aligns with the demands of contemporary lifestyles.

In summary, the Kenmore 640-082960815-7,122.16643900 is a feature-packed appliance that combines energy efficiency, durability, user-friendliness, and advanced technology. This model stands out as an essential addition to any home, promising reliable performance that meets the needs of today’s consumers while maintaining a commitment to sustainability. With Kenmore's reputation for quality and excellence, this appliance is poised to enhance daily living experiences significantly.