CAUTION: While it is possible for one person to assemble this grill, obtain assistance from another person when handling some of the larger, heavier pieces
1.Open lid of shipping carton and remove top sheet of cardboard. Lay cardboard sheet on floor and use as a work surface to protect floor and grill parts from scratches.
2.Remove packing materials from shipping carton.
3.You may slice the carton front corners with a utility knife to lay open the carton front panel. This will allow you to raise the grill head lid and remove the components packed inside the head.
Note: Be sure to slide grease tray out of back of grill head and remove all packaging from tray.
4.Use the parts list to check that all parts have been included.
5.Inspect the grill for damage as you assemble it. Do not assemble or operate the grill if it appears damaged. If there are damaged or missing parts when you unpack the shipping box, or you have questions during the assembly process, call:
For Assembly Questions, call
Assembling Grill Cart
1.Attach four casters to bottom panel using (16) 1/4 x15mm Phillips head screws, (16) 1/4 lock washers. Note: A is Swivel with Brake Caster, B is swivel caster, C & D are straight casters. (Fig.l)
2.Attach left & right side panels to bottom panel using (4) 5/32 x 8mm Phillips head screws with (4) 5/32 lock washers. (Fig.2)
3.Attach back panel to side panel & bottom panel using (3) 5/32 x 8mm and (4) 1/4 x 10mm Phillips head screws with (3) 5/32 & (4)1/4 lock washers.
(Fig.3)
4.Remove (4) 5/32 x 8mm Phillips head screws from door handles, then attach door handles to doors using the screws that were removed. (Fig.4)
5.Attach doors to side panels using (8) 5/32 x 8mm
flat head screws. (F!g. 5) Figure 1
/
/
/
X
Figure 2
i
Figure 3
Figure 4
Figure 5
8