ASSEMBLY
1
Place bottom shelf upside down. Insert Bent U Pin into the caster mounting plate to lock it in place, shown A.
Spin the caster clockwise into the threads on the bottom shelf until secure. Remove the Bent U Pin and repeat for remaining casters. Make sure the two locking casters are secured at the rear and the
Locking caster
Front
Bottom shelf
Rear
A
Bent U pin
2Attach side panels to bottom shelf using three
IMPORTANT: Panel with large hole must be on left side of bottom shelf.
Left side panel (with large hole)
Make sure side panels are pushed as far to the
rear of bottom shelf as possible before fully tightening screws.
7mm lock washer 7mm flat washer
Right side panel
17