Char-Broil 415.161209 manual Control Panel, Flange nut, Burner

3

Control Panel

Attach control panel / HVR assembly to firebox with two #10-24x1/2’’ machine screws, 5x15 fiber washers and #10-24

flange nut.

#10-24x1/2’’

5x15

Fiber Washer

Machine Screw

Qty.2

#10-24

Flange Nut

Qty.2

Qty.2

HVR Assembly

4

A

Burner

Place burner assembly into firebox. Make sure burner tubes are correctly engaged with valves. Fasten the burner assembly to the firebox using 5x15 fiber washers and #10-24x1/2’’ machine screws. Insert #10-24x1-1/4’’ machine screws from outside the firebox, then fasten with #10-24 flange nuts and 5x15 fiber washers from the inside (A). Insert one end of burner clip into hole in venturi tube and hook other end around valve manifold. Attach ignitor wire to ignitor (B).

Burner assembly

#10-24x1-1/4’’	#10-24x1/2’’	#10-24	5x15
Machine Screw	Machine Screw	Flange Nut	Fiber Washer
Qty.4	Qty.2	Qty.4	Qty.6

Valve Venturi

Tube

	Ignitor
Venturi Clip
Qty.2	Ignitor Wire
B
	Venturi Clip

18