14 Inside of cart, insert heat shield rear tabs(without holes) into slots between upper and lower back panels. Then insert left and right grease tray rails into slots beneath grease tray opening in upper back panel. Then insert end of tank wire into right arcuate slot on lower back panel, shown A.
Attach left and right rails to the bottom of front brace with two #8X3/8” self tapping screws. Attach heat shield front tabs and tank wire to the bottom of front brace with two #8X3/8” self tapping screws, sown B.
A
Left grease tray rail | Front brace |
Heat shield
Some components not shown for illustration purposes.
Right grease tray rail
Tank wire
B
Front brace
#8x3/8” tapping Screw
#8x3/8” tapping Screw
Rails
Tank wire
22