9 | Place Grill Lid on top of firebox assembly. Align hinge holes on back of unit. With the aid of a helper, attach Grill |
Lid to firebox using 2 each Hinge Pins. Once Hinge Pins are in place, insert Large Hair Pin Clip into hole in |
Hinge Pin. |
Next, install Smokestack by inserting 2 each 1/4-20x3/4screws though Grill Lid, insert Smokestack into Grill Lid hole, then secure using 2 each 1/4-20 flange nuts.
Attach Handle to Grill Lid, secure with 2 each 1/4-20 Flange nuts and 2 lock washers.
Hinge Properly Installed
Hinge Pin
Hair Pin Clip
Hinge Pin
Handle with
Barrel Spring
Lock Washer
1/4-20 Flange Nuts
1/4-20x1/2 Screws
Install the Swing-Away Grate by inserting 2 each 1/4-20x2" screws (one for each side of the lid) into Grill Lid and secure
10with 2 each 1/4-20 flange nuts. Place the wire loop in Swing-Awayover the shaft of the bolt, as shown below. Similarly secure the Swing-Away leg to the firebox using 2 each 1/4-20x3/4" screws and 2 each 1/4-20 flange nuts.
Wire Loop
1/4-20x2" Screw
Swing- | |
Away Leg | 1/4-20x3/4" |
| Screw |
1/4-20 Flange Nut
1/4-20x 3/4 Screw
Damper Wheel
1/4-20
Flat
Flange Nut
Washer
Attach the butterfly damper wheel to the firebox using 1 each 1/4-20x3/4"screw, 2 each flat washers, 1 lock washer and one 1/4-20 flange nut. DO NOT FULLY TIGHTEN THE FLANGE NUT. This will allow for rotation of the damper wheel.
