Serial Connector, Oxygen O2 Inlet Connector | Philips Trilogy 200

18

5.Serial Connector

You can use this connector to connect the device to a computer running PC Direct or Sleepware software or to other Philips Respironics devices such as Alice 5 and AOM. Use the Trilogy RS232 Serial Cable to connect the ventilator to the external device or computer.

6.Remote Alarm/Nurse Call Connector

If you are using an optional remote alarm or nurse call system with the ventilator, you can connect the Philips Respironics remote alarm adapter cable or nurse call adapter cable to this connector.

7.Ethernet Connector (when available)

You can connect a PC or router to this connector to upload therapy information to a secure web site so you can review therapy information remotely or remotely troubleshoot and service the device.

8.External Battery Connector (DC Power Inlet)

You can connect an external, stand-alone lead acid battery here, using the Trilogy External Battery cable.

9.Oxygen (O2) Inlet Connector

If using low flow supplemental oxygen, connect the oxygen

source to this connector using one of the O2 Inlet Quick Connects provided with the device.

10.Air Inlet and Filter

Insert the filter supplied with the device into the air inlet.

11.Detachable Battery Pack Slot

If you are using the Philips Respironics Lithium-Ion detachable battery pack to power the device, attach it here.

12.Cord Retainer

Secure the power cord using the cord retainer to prevent someone from accidentally disconnecting the power cord. See Chapter 4 for more information.

11

10

12 5 6 7 8 9

Rear Panel

Trilogy200 clinical manual

Image 29

Philips Trilogy 200 Serial Connector, Remote Alarm/Nurse Call Connector, Ethernet Connector when available, Cord Retainer

Contents

F 1 0 5 4 7 2 For CLINICIAN’S USE only Full Menu Access Mode F 1 0 5 4 7 2 Koninklijke Philips Electronics N.V. All rights reserved Page Table of Contents Dual Prescription Feature Iii Connect the Breathing Circuit to the Ventilator 100 139 Introduction Package Contents Intended Use Alternative Patient MonitoringVentilation Patient Disconnect Power Battery Back-upPersonnel Qualifications Operating TemperaturesStorage Bacteria Filter Fire or Explosion Remote AlarmsOxygen Improperly AlarmsFunctioning Ventilator Cleaning Maintenance Detachable Battery Battery LifeCondensation Air Filter Patient Circuit External DC PowerElectrostatic Discharge ESD System Overview Contraindications Symbol Description SymbolsFront Panel Rear and Side Panels How to Contact Philips Respironics Trilogy200 clinical manual Buttons Front Panel FeaturesSystem Description Display Screen Visual Indicators AC Power Inlet Side and Rear Panel FeaturesBreathing Circuit Connection Exhalation Porting Block Remote Alarm/Nurse Call Connector Serial ConnectorEthernet Connector when available External Battery Connector DC Power Inlet Therapy Modes Modes, Features, and Alarms Spontaneous Breath Breath TypesMandatory Breath Assisted Breath Therapy Parameters Therapy Mode Table Pressure Control Ventilation Therapy Modes Continuous Positive Airway Pressure Cpap ModeSpontaneous S Mode Spontaneous/Timed S/T Mode Timed T Mode Pressure Control PC Mode Seconds Control Ventilation CV Mode Volume Control Ventilation Therapy Modes Synchronized Intermittent Mandatory Ventilation Simv Mode Assist Control AC Mode Simv Mode Flex Therapy Mode FeaturesFlex Comfort Feature Bi-Flex Ramp Rise Time Avaps Feature Square Flow Pattern Types Ramp Dual Prescription Feature Sigh Feature Digital Auto-Trak Sensitivity Triggering Auto-Trak Sensitivity Shape Signal Spontaneous Expiratory Threshold Inspiration to Expiration Leak Compensation Flow Trigger Loss of Power Alarm Ventilator AlarmsVentilator Inoperative Alarm Ventilator Service Required Alarm Low Circuit Leak Alarm Check Circuit AlarmHigh Expiratory Pressure Alarm Low Expiratory Pressure Alarm Apnea Alarm Circuit Disconnect AlarmHigh Vte Alarm Low Vte Alarm Low Vti Alarm High Vti AlarmHigh Respiratory Rate Alarm Low Respiratory Rate Alarm Low Minute Ventilation Alarm Low Inspiratory Pressure AlarmHigh Minute Ventilation Alarm High Temperature Alarm Low Battery AlarmReplace Detachable Battery Alarm Ventilator Service Recommended Alarm Keypad Stuck Alarm AC Power Disconnected AlarmBattery Discharging Stopped due to Temperature Info Message Battery Not Charging due to Temperature Info Message Battery Depleted Info Message Check External Battery Info MessageExternal Battery Disconnected Info Message Detachable Battery Disconnected Info Message Ventilator Setup Position the Device Install the Air FilterSupply Power to the Device Connecting the AC Power Cord Ventilator Setup Using AC Power External Battery Using DC Power Attaching the Detachable Battery Detachable Battery Pack Battery Capacity Device Power Source IndicatorsInternal Battery AC Power Indicator DC Power Indicator Description DC Power IndicatorsBattery First Time Use Battery Disposal Connect the Breathing Circuit to the Ventilator Active Exhalation Device with Proximal Pressure Connecting the Flow Sensor Ventilator Setup Connect a Water Trap Connect Supplemental Oxygen Optional Connect the Remote Alarm Optional Keypad Lock Feature Viewing and Changing Settings Accessing the Startup and Monitor Screens Monitor Screen Detailed View On Indicator Description Monitor Screen IndicatorsMonitor Panel Indicators Per Minute BPM. This only appears in detailed view PIP Measured Settings Panel Status Panel Indicators Displays when the Ramp feature is active On-Screen Button Panel Navigating the Menu Screens Changing and Viewing Settings in Full Menu Access Mode Dual Prescription Setting Changing the Device Settings and AlarmsDevice Settings Common to All Therapy Modes Circuit Type Mode Setting Apnea Circuit Disconnect High Vte Low VteLow Vti High Vti High Minute Ventilation Low Minute VentilationLow Respiratory Rate High Respiratory Rate High Inspiratory Pressure Additional Settings Specific to Therapy ModesLow Inspiratory Pressure Ramp Length Spontaneous S Mode Ipap Spontaneous/Timed S/T Mode Pressure Control PC Mode Control Ventilation CV Mode Assist Control AC Mode Viewing and Changing Options Menu Items Following settings are available on the Options menu Viewing and Changing Settings Trilogy200 clinical manual Alarm Log Screen Viewing the Alarm Log Viewing Device Information Viewing the Event Log Updating Prescriptions Using the SD Card Trilogy200 clinical manual Message Cause Action Changing and Viewing Settings in Limited Menu Access Mode Activating Your Primary or Secondary Prescription Viewing and Changing My Settings Menu Items Progressively increase the pressure relief Start Therapy Connecting the Ventilator to the PatientPerform System Checkout Ventilator Alarms 100 Audible and Visual Alarm IndicatorsAlarm LED Indicators 101 Audible Indicators 102 Alarm Messages 103 Alarm in Menu Banner Screen 104 Remote Alarm Alarm Reset Audio Pause and Alarm Reset FeaturesAudio Pause 105 106 What to Do When An Alarm OccursAlarm Volume Control 107 Alarm Summary Table 108 Clinician Remove 109 110 111 112 113 114 115 116 117 118 119 120 121 Cleaning and MaintenanceCleaning the Ventilator 122 Cleaning and Replacing the Air Inlet Filter 123 Replacing the Air Inlet Path Foam 124 Cleaning the Patient CircuitCleaning Instructions Reusable Circuits Replacing the Bacteria Filter Optional Cleaning the Exhalation Devices125 126 Preventive Maintenance 127 Time / Hours of Service Recommended Maintenance 128 Issue Why It Happened What To Do Troubleshooting129 Device does not turn on Batteries are not 130Charging Performance of the device Excessive Warm Air Out 131Mask Mask Discomfort Dryness 132Sinus or Ear Pain Exhalation Valve or Flow Adding a Humidifier AccessoriesAdding Supplemental Oxygen to the Device 133 134 Using a Remote Alarm UnitSupplemental Oxygen Warnings 135 Using a Nurse Call SystemUsing a Secure Digital SD Card 136 Using the Philips Respironics DirectView SoftwareUsing the Optional In-Use Bag 137 Traveling with the SystemAirline Travel 138 Tools Required System Checkout ProceduresVisual Inspection 139 Settings and Alarms Tests Initial SetupSetup Setting Value 141 Setting Value High Vte/High Vti 50 ml Verify the High Tidal Volume AlarmSetting Value High Vte/High Vti 500 ml 142 Setting Value High Vte/High Vti Off Verify the Low Tidal Volume AlarmSetting Value Low Vte/Low Vti 500 ml Setting Value Low Vte/Low Vti 50 ml Setting Value Low Vte/Low Vti Off Verify Circuit Disconnect AlarmSetting Value Circuit Disconnect Seconds 144 145 Verify the High Inspiratory Pressure AlarmSetting Value Circuit Disconnect Off 146 Verify the Low Inspiratory Pressure Alarm 147 148 Battery Function Verification 149 Verify the External Battery Function If Available 150 Alarm and Event Log Clean-UpResults Environmental Technical SpecificationsPhysical Standards Compliance Pressure ElectricalSD Card and SD Card Reader 152 Parameter Range Accuracy Control Accuracy153 Measured Patient Parameters Spontaneous Breathing During Power Failure ConditionsDisposal 154 Term/Acronym Definition Glossary155 Btps 156 OSA PC Simv 157 158 159 160 161 EMC Information Immunity Test IEC 60601 Test 162Electromagnetic Level Distance in meters m 163 Watts 164 165 Index 166 167 168 169 Limited Warranty 170