Changing the Device Settings and Alarms
From the Main Menu screen, use the Up/Down button to highlight the Settings and Alarms menu, and press the Right button to select the menu.
Device Settings Common to All Therapy Modes
Some of the settings on this menu will vary depending on the therapy mode you select. The section below describes all of the settings that are common to all therapy modes.
Dual Prescription Setting
You can turn the dual prescription setting on or off. Enable the setting if you want to create two separate prescriptions for the patient. For instance, you may want to set up a daytime prescription and then a separate nighttime prescription. If you enable this setting, then the menu options on the Main Menu will change to include three new options:
•• Switch to Primary/Secondary Settings
•• Primary Settings and Alarms
•• Secondary Settings and Alarms
The Main Menu screen will look like the screen below.
73
Note: In the Options menu described later in this chapter, you can specify the Pressure Units displayed by the device, choosing either cm H2O, hPa, or mBar. The default setting is cm H2O, so this manual uses cm H2O throughout.
Main Menu Screen with Dual Prescription Enabled
Chapter 5 Viewing and Changing Settings
