Using AC Power
An AC power cord is provided with the device.
1.Plug the socket end of the AC power cord into the AC power inlet on the side of the device. To prevent accidental removal of the AC power cord from the device, you may secure the AC power cord to the device using the AC power cord retainer located on the back of the device.
2.Plug the pronged end of the cord into a wall outlet not connected to a wall switch.
3.Ensure that all connections are secure. If AC power is connected correctly and the device is operating properly, the green AC Power LED should be on.
51
Note: This device is activated (i.e., ‘powered on’) when the AC power cord is connected or any of the three battery sources is available. Pressing the Start/Stop button turns the airflow on or offf.
CAUTION
The device may only be operated at temperatures between 5˚ C and 40˚ C (41˚ F and 104˚ F).
WARNING
Periodically inspect the power cord for damage or signs of wear. Discontinue use and replace if damaged.
Note: To remove AC power, disconnect the power supply cord from the electrical outlet.
