Philips Trilogy 200 manual Maintenance, Cleaning

8

Maintenance	Follow the service recommendations provided in Chapter 7 of this
	manual.
	Periodically inspect electrical cords, cables, and the detachable battery
	pack for damage or signs of wear. Discontinue use and replace if
	damaged.
	Repairs and adjustments must be performed by Philips Respironics-
	authorized service personnel only. Unauthorized service could cause
	death or injury, invalidate the warranty, or result in costly device
	damage.
Cleaning	To avoid electrical shock, always unplug the power cord from the wall
(Refer to Chapter 7	outlet before cleaning the ventilator.
for detailed cleaning
	Do not immerse the device in any fluids or spray the device with water
instructions.)
	or cleaners. Clean the device with a cloth dampened with an approved
	cleaner.
	If the device has been exposed to rain or dampness, dry the device
	including the area around the power cord connection with the power
	cord disconnected from the device before applying AC power.

Cautions

A caution indicates the possibility of damage to the device.

Storage

The internal and detachable batteries will self-discharge in storage. If it is desired to keep the batteries fully charged (for example, as a back- up ventilator), plug the device into AC power for about eight hours every 16 days. Alternatively, the ventilator may be left continuously connected to AC power without battery degradation.

Allowing the batteries to fully discharge will not harm the batteries or lose device settings, but may require a longer battery charge time prior to use.

Trilogy200 clinical manual