4.1.3Programme pool
The programme pool contains all programmes in alphabetical order. Press the [M] button to select the satellites. Press the [TV] button to select free or encrypted programmes. In „All Free“ („All CA“) you will find all the free (all unencrypted) programmes of the selected satellite, and also the new free or encrypted programmes after a satellite search.
[▼] [▲] Select programmes in the rows | [◄] [►] Select programmes in the columns |
All selected programme are immediately set by the receiver and displayed in the background. For encrypted programmes, the respective CA module must be equipped. With the [F] button and (within 2 seconds) with the [◄] or [►] button, the transparency of the screen display can be changed.
(OK) The programme names given from the broadcasting stations can be individually extended or changed by pressing the [OK] button.
(M)Selection of the satellite with the [M] button.
(TV) Selection of free or encrypted programmes with the [TV] button.
() After pressing the [Mute] button, individual programmes can be deleted – e.g. programmes, which the company has set.
( R ) Here, the programme pool which is activated with the [M] and [TV] buttons can be cleared out, which means all „unused“ programmes or also all displayed programmes can be deleted (see also ‘CLEAR OUT’ under 4.5.2).
( i ) Display of antenna signal and reception parameters
In the submenu „Antenna signal“ you can optimally align your parabolic antenna if needed. Turn the antenna to optimise the signal strength and the figure of merit of reception. For very weak signals, the signal strength scale can also go to 0 – Then, optimise the signal with the scale for the figure of merit of reception.
If the message „no signal“ appears, and only the signal for the signal strength is displayed, then the antenna is probably aligned to a (not receivable) satellite for analogue signals.
- 12 -
