4.3. Satellite
The satellite ASTRA is set at the factory. The other 7 satellites, e.g. Hotbird, are
Activate the desired satellite number, e.g. with the numerical buttons [1...8], and call up the entry menu with the [OK] button.
(1)Entering or changing the name
Activate the entry field {NAME} with the [1] button, and then activate the field with the [OK] button. With the [▼] or [▲] button, you can select the letters (capitalised a. small) or digits.
With the [►] or [◄] button, you can move the entry position to the right or to the left.
After entering the desired name, the entry field is deactivated by pressing the [OK] button again.
(2)Enter in LO1
(3)Enter in LO2
LO1 a. LO2 are
If the LNB LO frequencies deviate from the
Please make sure, that a ‚digital‘ compatible LNB is integrated in your receiving system.
(4)Enter in the orbit position
The parameter „Orbit position“, possible values 1...4, must be given for controlling the DiSEqC.
(5)Release
{ON} | The selected satellite is released for your receiving system. |
{OFF} | The selected satellite is locked. |
4.4.Installation
4.4.1.Time offset
After switching the unit on via the mains switch or after a power failure, the time and date for the timer is taken from the received data. In order for the time and date of the receiver to comply with the current local time, the deviation from the normal time must be given.
The offset for the UTC summer time is {+ 2} hours and for the UTC winter time is {+ 1} hour.
Please check or correct the time offset for initial operation and then for the time change in spring and fall.
(1)Call this up with the digit [1] or with the set the desired time difference with the [OK] button.
[▼] [▲] buttons. Then, activate it with the [OK] button, and [►] [◄] buttons. The change is completed by pressing the
Note: When the time offset is wrong, the programme times will be incorrectly displayed.
- 15 -
