3. Operation
3.1. Local control
Open (and close) the flap on the front panel of the unit by pressing the dotted area (left).
The local control consists of the buttons [STANDBY], [▲] and [▼] for switching the programmes (up/down), as well as [ - ] and [ + ] for adjusting the volume.
|
| VOLUME | CHANNEL | |
STANDBY | - | + | ▼ | ▲ |
| R | TV |
|
|
To switch between radio and TV, quickly press the button [STANDBY] and within one second the [ - ] button for radio or the [ + ] button for TV operation.
For a second, the LED display shows the
The unit has an On/Off switch with mains separation.
The display of the programme number appears on a
P 9 9 9
r2 5 t 1 2 3
P 2.3.4.
V c r
V c r -
-
Display of TV programmes
Display of radio programmes
Display t = TV mode ( + programme number of the satellite receiver )
Note: The unit has been switched to TV operation with the TV button. The picture on the television set comes from the TV set; e.g. with an additional cable connection.
The points are displayed, when the unit is muted.
Display ‚Vcr‘:
The video/audio signal from the video recorder is automatically switched to the television set during play – also in standby.
Display
The unit is in standby and can be switched on by pressing the [STANDBY] button.
3.2. Functions of the remote control
The unit is switched on in standby by pressing the red button or with the numerical buttons [ 0 ]
... [ 9 ] .
A description of the remote control functions is integrated in the unit’s software. In order to call up the function description, simply press the [RC] on the remote control and then the button, whose function is to be described
Exit the help menu by pressing the [RC] button again.
The [◄] [►] and [▲] [▼] buttons, which are arranged around the OK button, possess the volume function
- 5 -
