MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
■Front View
q w e t y u | i |
TIMER | HDD | MEMORY CARD |
| ALARM | FULL |
OPERATE | SUSPEND |
DAYLIGHT
SAVINGS LOCK
r
qOperate Indicator [OPERATE]
Lights while the power switch on the rear is turned on.
wTimer Record Reservation Indicator [TIMER]
Lights when a reservation is made for internal timer recording.
eAlarm Suspension Indicator [ALARM SUSPEND] Lights when an alarm is activated while alarm suspen- sion is selected. The alarm will be logged in the event history, but recording is suspended and the buzzer will not sound.
rDaylight Saving Button [DAYLIGHT SAVINGS]
Press the recessed button with a pin to advance the internal clock by one hour to daylight saving time, or to set it back to normal time. While the clock is on day- light saving time, an asterisk * appears in the time and date display on the LCD and on the video monitor.
tHDD Access Indicator [HDD]
Lights while the disk is being accessed.
yFull Indicator [FULL]
Blinks when the remaining disk capacity reaches the preset value, and lights when the disk is full.
uLock Indicator [LOCK]
Lights when buttons and JogDial on the front panel are disabled.
iMemory Card Slot [MEMORY CARD]
Open the lid to insert the CompactFlash card into the slot or to remove it from the slot. The card is used to store still pictures for browsing through them on a per- sonal computer.
oLCD
Displays setup parameters while working with menus, or the operating status while recording or playing back.
o!0!1!2!3!4
DISPLAY SELECT | SETUP/ESC |
|
| PUSH– | PAUSE SET |
STOP | PLAY | REC | / | / | |
|
| PLAY MODE SELECT |
|
|
|
LCD CONTRAST | ALARM SEARCH | STEP | REW/FF |
|
|
|
|
|
|
| |
|
| / | / |
|
|
Digital Disk Recorder
!5!6!7 !8
!0LCD Button [DISPLAY SELECT]
There are five positions to press; up, down, left, right and center. Press the appropriate positions to select a parameter on the LCD.
!1LCD Contrast Control [LCD CONTRAST]
Adjust the LCD contrast by rotating the control knob with a small screw driver.
!2Stop and Setup/ Escape Button [■ STOP] [SETUP/ESC]
Pressing this button in any mode other than menu setup stops recording or playback.
Holding down this button for 2 seconds calls up setup menus or escapes from the setup.
Press this button to go back one step to the previous selection in the setup menu.
!3Play Button [5 PLAY]
Press this button to start playback. The LED lights while playing back, and blinks while pausing or searching.
!4Recording Button [● REC]
Press this button to start recording. The LED lights while recording, and blinks while alarm recording.
!5to !7are PLAY MODE SELECT buttons that also specify the JogDial performance in the selected play mode. See pages 35, 36 and 37 for further details.
!5Alarm Search Button [ALARM SEARCH]
Press this button to search for a desired record in the alarm log. The LED lights in the alarm search mode.
!6Step and Down Button [STEP A❚❚/❚❚B] [C]
Press this button to start playing back still pictures field by field. The LED lights in the step playback mode. Press this button to move the cursor downward in a setup menu on the monitor.
6
