■Initializing
You can either initialize all disk contents including image data and setup data, or setup data only.
●Initializing All Contents & Setup Data
Warning! The following are irrevocable procedures. We strongly recommend that you copy important pictures from the hard disk to CompactFlash cards before initial- izing.
ON
OFF
ON
1 2 3 4 5 6
MODE
1.Press the [■ STOP] button to stop recording or play- back.
2.Turn off the power.
3.Set MODE switches #1 through 4 on the rear panel as follows:
#1: ON#2: OFF
#3: OFF
#4: ON
4.Turn on the power.
The disk contents and setup data are initialized.
●Initializing Setup Data
SYSTEM INFORMATION
HDD | HOUR METER | 1000H | GB |
HDD | CAPACITY | . | |
DEFAULT→ | SET→ |
| |
1.Open the SYSTEM INFORMATION window, then move the cursor to DEFAULT.
2.Press the JogDial to move the cursor to SET.
3.Press the JogDial.
4.Select YES with the JogDial.
YES: Initializing of setup data is enabled.
5.Press the JogDial.
SET DONE appears on the monitor after initializing.
6.Press the [SETUP/ESC] button. The cursor moves to DEFAULT.
7.Hold down the [SETUP/ESC] button for 2 seconds to quit the setup.
NOW FORMATTING HDD
5.Turn off the power, and return the MODE switches to the previous positions.
18
