INSTALLATION
●Warning
This installation should be made by qualified service personnel or system installers.
●Caution Notes Regarding Installation
Places to avoid
•Direct exposure to sunlight or near a source of heat such as a radiator.
•Very dirty and dusty places. Places subject to strong vibrations.
•Near a transformer, dimmer, video player, radio or monitor. These may cause humming noise, etc.
Caution notes regarding mounting
•Do not block the ventilation openings or slots in the cover to prevent the appliance from overheating.
•Always keep the temperature in the rack within +45°C (113°F).
•Secure the rear of the appliance to the rack with additional mounting brackets (procured locally), if the rack is subject to vibration.
■Mounting in the Rack
1.Remove the four rubber feet by removing the four screws on the bottom of the unit.
3.Install the unit with the rack mounting brackets in the rack by using four screws (not included).
Rack
Remove 4 rubber feet.
2.Place the rack mounting brackets on both sides of the unit and tighten with the six supplied screws (M3 x10).
Six screws (Supplied)
Fix the rack mounting brackets.
9
