Panasonic WJ-HD100 System Setup, HDD FULL Selection 007 HDD FULL, R-Lower, Skip&Play

CLOCK→ JAN 7.00		8:09
TIME&DATE	TYPE1 24H
TIME&DATE DISP.ON
TIME&DATE POSI.R-LOWER
STATUS DISP.	ON
STATUS POSI.	R-LOWER
HDD FULL	1%

DISPLAY SELECT

LCD CONTRAST

1.Move the cursor to STATUS POSI. with the [▲] or [▼] button.

2.Select the desired position with the JogDial. The default is R-LOWER.

L-UPPER:Displays the status in the left upper corner.

R-UPPER:Displays it in the right upper corner.

CENTER: Displays it in the center.

L-LOWER:Displays it in the left lower corner.

R-LOWER:Displays it in the right lower corner.

OFF: Status display is disabled.

●HDD FULL Selection 007 HDD FULL

Set the disk capacity from 1 % to 99 % to warn the operator that the available capacity is nearing the end. There are two warning levels. First the FULL indicator on the front panel blinks when the remaining disk capacity has reached the preset value. Finally the buzzer beeps when the disk is full, provided that the DISK END BUZZER parameter in the REC SETUP menu is set to ON. At the same time the FULL indi- cator turns on.

CLOCK→ JAN 7.00 8:09

TIME&DATE TYPE1 24H

TIME&DATE DISP.ON

TIME&DATE POSI.R-LOWER

STATUS	DISP.	ON
STATUS	POSI.	R-LOWER
HDD FULL		1%

DISPLAY SELECT

LCD CONTRAST

1.Move the cursor to HDD FULL with the [▲] or [▼] but- ton.

2.Select the desired value with the JogDial. The default value is 1 %.

1% to 99 %: The FULL indicator blinks when the remaining disk capacity reaches the selected value.

■SYSTEM SETUP

●Quick Play Mode Selection 101 FWD/REW MODE

Picture search is available in quick forward and backward playback. Set the playback picture rate (FWD/REW MODE) in the SYSTEM SETUP window to SKIP or SKIP&PLAY. The playback sequence for each mode is shown below.

SKIPSkip

Data recorded on the Disk

Time

Image displayed

on the Monitor

Expanded

1 Field Still ImageTime

SKIP&PLAY Skip Play

Data recorded on the Disk

Time

Image displayed
on the Monitor		Expanded
	A Series of 32 Fields	Time

1.Hold down the [SETUP/ESC] button for 2 seconds to display the setup menu on the monitor.

2.Press the down [▼] button repeatedly until the SYSTEM SETUP window appears. (You can switch through the setup menus by repeatedly pressing the up [▲] or down [▼] button.)

3.Move the cursor to FWD/REW MODE with the up [▲] or down [▼] button.

4.Rotate the JogDial to select the desired parameter. The default is SKIP&PLAY.

[SKIP]: One field still picture is picked up from the disk and displayed on the monitor as shown above. This is quicker than skip and play.

[SKIP&PLAY]: A 32-field series of pictures is played back. We recommend that you select [SKIP & PLAY] when a video multiplexer is installed in the system.

SYSTEM SETUP

FWD/REW MODE		SKIP&PLAY
PASSWORD LOCK		OFF
	ALL→	*****
	OPERATION→	*****
KEYLOCK BUZZER		OFF
RESET PULSE		HIGH
TIME ADJUSTING		SLAVE
	SET TIME→	9:00
AUTO ERASING		OFF
			DISPLAY SELECT
			LCD CONTRAST

5.Press the [SETUP/ESC] button for 2 seconds to quit setup.

21