REC SETUP |
| ||
REC MODE |
| SF- | 12H |
REC RATE | 15FPS | ||
REC QUALITY | |||
DISK END | MODE |
|
|
STOP |
| ||
DISK END | BUZZER | ON |
|
JOG/EXT REC | JOG CLICK | ||
REC MODE | SF- | 12H | |
DISPLAY SELECT
LCD CONTRAST
1.Move the cursor to DISK END MODE with the up [▲] or down [▼] button.
2.Rotate the JogDial to select the desired parameter. The default is STOP.
[STOP]: Stops recording until a mode other than [STOP] is selected.
[CONTINUE]: Old data is automatically overwritten from the disk start.
[ALM CONTINUE]: Recording is suspended until an alarm occurs. When an alarm occurs, alarm recording overwrites old data from the disk start.
[SERIES]: In series connection, new data is recorded from start to end of the next recorder's disk and so forth. In loop connection, new data continuously overwrites old data.
[ON]: Enables the buzzer beep at the disk end (remain- ing space 0 %).
[OFF]: Disables the buzzer beep.
●Jog Click Terminal Definition 206 JOG/EXT REC
The JOG CLICK terminal on the rear panel is connected with an external switch. The switch is used either to remote- ly click the JogDial or to implement the preset mode for manual recording.
|
|
|
|
JOG/EXT REC | JOG | CLICK |
|
EXT REC MODE | SF- | 12H |
|
|
|
|
|
DISPLAY SELECT
LCD CONTRAST
1.Move the cursor to the desired item with the [▲] or [▼] button.
2.Select the appropriate parameter by rotating the JogDial.
JOG CLICK: Turning on the external switch has the same effect as pressing the JogDial.
EXT REC: While the switch is turned on, the preset EXT REC mode is implemented.
●Disk End Buzzer Setup
205 DISK END BUZZER
The buzzer can be set up to beep at the point where the disk is full (remaining space 0 %).
●External Recording Mode 207 EXT REC MODE
Select the mode for manual recording after having set the JOG/EXT parameter to EXT REC.
REC SETUP |
| |||
REC MODE |
| SF- | 12H | |
REC RATE | 15FPS | |||
REC QUALITY | ||||
DISK END | MODE | STOP |
| |
DISK END | BUZZER | ON |
|
|
JOG/ EXT | REC | JOG CLICK | ||
REC MODE | SF- | 12H | ||
1.Move the cursor to DISK END BUZZER with the up [▲] or down [▼] button.
2.Rotate the JogDial to select the desired parameter. The default is ON.
JOG/EXT REC | EXT | REC |
|
EXT REC MODE | SF- | 12H |
|
|
|
|
|
DISPLAY SELECT
LCD CONTRAST
1.Move the cursor to EXT REC MODE with the [▲] or [▼] button.
2.Select the desired mode with the JogDial. Refer to page 24 for the recording mode parameters. The default value is
26
