Panasonic WJ-HD100 operating instructions Troubleshooting, Phenomenon, Cause, What to do

TROUBLESHOOTING

Phenomenon	Cause	What to do
The pictures copied to the	The monitor receives the multiscreen-	Connect the video monitor directly with
CompactFlash card are not the ones	out signal from the video multiplexer.	the WJ-HD100.
displayed on the monitor.
Setup menus supplied from the Matrix	The WJ-HD100 does not record non-
Switcher cannot be recorded.	interlace video.
The recorded channel # differs from the	This may happen when the video multi-	Set the field rate to 7.5 fps or slower.
original supplied from the video multi-	plexer is connected with CAMERA SW
plexer.	OUT, and the field rate is set to 10 fps
	or faster.
VMD does not function.	VMD does not function in playback.	Stop playback.
T & D or status display is pushed out of	This may happen with some monitors.	Adjust the scan size of the video moni-
the display range on the monitor.		tor.
The bottom portion of the playback pic-	This may happen with some monitors,
ture on the monitor is darker.	WJ-HD100 records up to 234H per
	field.
	Ventilation is blocked.	Remove obstacles placed near ventila-
Error message appears saying “TEM-		tion openings and the fan.
PERATURE ERROR SYSTEM
	Failure of cooling fan	Contact your dealer for replacement of
STOPPED”.
		the fan.
Alarm recording does not function in a	The ALARM IN signal has the wrong	Set the ALARM OUT switch (SW3)
system including a video multiplexer.	polarity for the WJ-HD100.	inside the video multiplexer to O.C.
		referring to the manual.

42