Panasonic WJ-HD100 Setup Procedures, Prior to Setup, Turning On the Power, Turning Off the Power

SETUP PROCEDURES

■Prior to Setup

●Turning On the Power

POWER

ON

SIGNAL GND

OFF

OPERATE

TIMER

ALARM

SUSPEND

DAYLIGHT

SAVINGS

●Turning Off the Power

DISPLAY SELECT	SETUP/ESC			PUSH–	PAUSE SET
	STOP	PLAY	REC	/	/
		PLAY MODE SELECT
LCD CONTRAST	ALARM SEARCH	STEP	REW/FF
		/	/

Digital Disk Recorder WJ-HD

DISPLAY SELECT

LCD CONTRAST

1.Plug the power cord into the AC outlet.

2.Turn on the power switch on the rear panel.

The operate LED lights, and the date, time and operat- ing status are displayed on the LCD.

Power-on recording will start if [Timer Rec] has been set to [EXT] with the LCD button.

Note: Avoid turning the power on and off within a short time. Allow at least 5 seconds from off to on and vice versa.

	TIMER	HDD	Confirm that
	ALARM
OPERATE	SUSPEND	FULL	the HDD access
	DAYLIGHT	LOCK	indicator is off.
	SAVINGS

POWER

ON

SIGNAL GND

OFF

1.Press the stop button to quit recording or playback. Make certain that the HDD access lamp turns off.

2.Turn off the power switch on the rear panel.

The operate LED goes out, and the operating status on the LCD disappears.

Note:

•Do not turn off the power while the HDD access lamp is on.

•Do not leave the unit turned off for a long time. Supply AC power to the unit and turn it on to charge up the backup battery.

15