Panasonic WJ-HD100 operating instructions Addendum, English Version

ENGLISH VERSION

ADDENDUM

The following changes and additions have been applied to the WJ-HD100 Operating Instructions.

Default setting Changes

●REC SETUP windows on page 17, 24, 25 and 26:

The default setting for DISK END MODE is changed from [STOP] to [CONTINUE].

The fourth line of text on page 26 is also changed from STOP to CONTINUE well.

Changes

●System Info window on Page 17 & 31: VERSION display has been changed.

●Folders & Files on page 40: Descriptions are replaced with the following.

In each COPY TO CARD operation, a folder with a 6-digit name is created on the card, for example, 000001, 000002 and so forth. A folder contains files having the [.jpg] or [.htm] extension as shown below.

SYSTEM INFORMATION

HDD	HOUR METER	1000H
HDD	CAPACITY	.	GB
DEFAULT→		SET→

VER x.xx(x.xx x.xx x.xx)

HD100

000001 000001.jpg 000002.jpg

000003.jpg

Blue.jpg

Viewer.htm

000002

●Communication Protocol, Setup Control on page 48 has been corrected.

Item	Transmission Command (ASCII)	Response (ASCII)	Parameter (ASCII)
Cursor Moves	DCR:n1n2	DCR	n1=A Right
			n1=C Upward
			n1=E Left
			n1=G Downward
			n2=1 Move a step
			n2=2 Move multi steps
			n1n2=+1 Select parameter(+)
			n1n2=-1 Select parameter(–)
			n1n2=PD Move to lower layer
			n1n2=P+ Move to upper layer (deletion)
			n1n2=P- Turn a newer page (deletion)
			n1n2=PU Turn an older page (deletion)
			n1n2=PU Move to upper layer (addition)
Setup	MSU:n	MSU (deletion)	n=0	End setup
		MSU:n (addition)	n=1	Begin setup