Panasonic WJ-HD100SETUP MENU, Clock Setup 001 CLOCK, Time & Date Type 002 TIME&DATE TYPE

■WJ-HD100 SETUP MENU

●Clock Setup 001 CLOCK>

Set the internal timer to the present time and date. The default value is “JAN 1.00 0:00”.

1.Hold down the [SETUP/ESC] button for 2 seconds to display the setup menu on the monitor.

2.Move the cursor on the monitor to CLOCK with the [▲] or [▼] button. The selected item appears also on the LCD with item number (001 in this case), and parame-

ters (JAN 1.00 0:00, month-day-year and time) in the second line.

1, 6, 7				3, 4
DISPLAY SELECT	SETUP/ESC			PUSH–	PAUSE SET
	STOP	PLAY	REC	/	/
		PLAY MODE SELECT
LCD CONTRAST	ALARM SEARCH	STEP	REW/FF
		/	/

Digital Disk Recorder WJ-HD

WJ-HD100 SETUP MENU

CLOCK→ JAN 1.00 0:00

TIME&DATE TYPE1 24H

TIME&DATE DISP.ON

TIME&DATE POSI.R-LOWER

STATUS	DISP.	ON
STATUS	POSI.	R-LOWER
		DISPLAY SELECT
HDD FULL		99%
		LCD CONTRAST

●Time & Date Type

002 TIME&DATE TYPE

Select the 24-hour or AM-PM time system. When AM-PM is selected, the time is followed by A or P, for example, 7:00 A.

You can also select display style TYPE1 or TYPE2 as shown below.

		2
WJ-HD100 SETUP MENU
CLOCK→	JAN 1.00		0:00
TIME&DATE		TYPE1 24H
TIME&DATE DISP.ON
TIME&DATE POSI.R-LOWER
STATUS DISP.		ON
STATUS POSI.		R-LOWER
HDD FULL		1%

DISPLAY SELECT

LCD CONTRAST

3.Move the cursor to the right by pressing the JogDial. The cursor highlights the item position (month digits).

4.Select the appropriate parameter (month) by rotating the JogDial.

5.Repeat the above steps 3 and 4 to set day, year and time.

6.Press the [SETUP/ESC] button.

7.Hold down the [SETUP/ESC] button for 2 seconds to quit the setup.

Note: Beside the JogDial the [▲] and [▼] buttons are also used to move the cursor for setting time and date.

JAN 1.00 7:07:00

TYPE1

JAN 1.00 7:07:00

TYPE2

WJ-HD100 SETUP MENU

CLOCK→ JAN 1.00			7:07
TIME&DATE		TYPE1 24H
TIME&DATE DISP.ON
TIME&DATE POSI.R-LOWER
STATUS DISP.		ON
STATUS POSI.		R-LOWER
			DISPLAY SELECT
HDD	FULL	99%	LCD CONTRAST

1.Move the cursor to TIME&DATE with the [▲] or [▼] but- ton.

2.Select the parameter with the JogDial. The default value is TYPE1 24H.

TYPE1 24H: Time & date are displayed in one line in the 24-hour system.

TYPE1 12H: Time & date are displayed in one line in the AM-PM system.

TYPE2 24H: Time & date are displayed in two lines in the 24-hour system.

TYPE2 12H: Time & date are displayed in two lines in the AM-PM system.

19