5.3 Setting Up the Paper Sources (“PAPER SOURCE SETUP” Menu) | 5 | |
|
|
|
5.3Setting Up the Paper Sources (“PAPER SOURCE SETUP” Menu)
From the “PAPER SOURCE SETUP” menu, the various settings for the paper trays can be changed.
“PAPER SOURCE SETUP” menu:
No. | PAPER SOURCE SETUP | Description | |
1 | INCH/METRIC | This function can be used to set the size measurement system | |
|
| for the paper loaded in each tray. It can be used to select | |
|
| whether paper measured in centimeters (“METRIC”), such as | |
|
| A4 and B5 sizes, or paper measured in inches (“INCH”), such | |
|
| as Letter size, is loaded. If no particular setting is selected, the | |
|
| paper size is detected automatically.* | |
|
| If “METRIC” is selected for a paper tray on a model set to use | |
|
| inch measurements, paper loaded into that tray cannot be used | |
|
| in Fax mode. | |
|
| If “INCH” is selected for a paper tray on a model set to use | |
|
| metric measurements, paper loaded into that tray cannot be | |
|
| used in Fax mode. | |
|
| • | For metric area: |
|
|
| The manufacturer’s default setting is “METRIC”. |
|
| • | For inch area: |
|
|
| The manufacturer’s default setting is “INCH”. |
|
|
| |
2 | TRAY1 PAPER | This function can be used to set the type of paper (“PLAIN”, | |
|
| “OHP”, “CARD” or “ENVELOPE”) loaded into the Tray1, and the | |
|
| size of the paper (“AUTO” or “SIZE INPUT”). If the paper size is | |
|
| set to “SIZE INPUT”, type in the paper size.* | |
|
| If a setting other than “PLAIN” or “AUTO” is selected, paper | |
|
| loaded into Tray1 cannot be used in Fax mode. | |
|
| • The manufacturer’s default settings are “PLAIN” and | |
|
|
| “AUTO”. |
|
|
| |
3 | PAPER TYPE | For details on this menu, refer to the Di1611/Di2011 User | |
|
| Manual. | |
|
|
|
|
* For details on the settings, refer to the Di1611/Di2011 User Manual.
Using the Utility Mode Chapter 5
Fax Kit |
