Konica Minolta (FX-3) Specifying the Setting for Default TX, Specifying the Setting for Header

6.2 Setting Up the Transmission

4 Using the [	Ö	] and [Ö] keys, select
the desired halftone setting, and
then press the [Yes] key.
❍ The halftone settings appear
as follows.
STD: Standard
FINE: Fine
S/F: Super Fine
The “TX OPERATION” menu appears again.
Specifying the Setting for “DEFAULT TX”

1Select the “TX OPERATION”.

❍ Refer to “Selecting the “TX OPERATION” menu” on page 6-31.

2Press the [3] key from the 10-Key

Pad to select “DEFAULT TX”.

3 Using the [	Ö	] and [Ö] keys, select
either “MEM.TX” or “ADF TX”, and
then press the [Yes] key.
The “TX OPERATION” menu
appears again.

Specifying the Setting for “HEADER”

1Select the “TX OPERATION”.

❍ Refer to “Selecting the “TX OPERATION” menu” on page 6-31.

2Press the [4] key from the 10-Key

Pad to select “HEADER”.

3 Using the [	Ö	] and [Ö] keys, select
either “ON” or “OFF”, and then
press the [Yes] key.

The “TX OPERATION” menu appears again.

6

Using the Utility Mode (Fax) Chapter 6

Fax Kit (FX-3) 6-33