Konica Minolta (FX-3) manual Refer to Dialing on

4.1 Transmission Methods 4

5Specify the relay station, and then

press the [Yes] key.

❍ Refer to “Dialing” on page 3-2.

A screen appears, allowing you to specify the relay box ID.

6Using the 10-Key Pad, enter the

relay box ID.

❍ Enter the relay box ID (20 digits or less) programmed at the relay station.

❍The only characters that can be used in the mailbox ID are 0 through 9, , and #.

❍If you wish to correct the ID, press the [No] key, and then enter the new number.

7Press the [Yes] key.

A screen appears, allowing you to specify the password.

8Using the 10-Key Pad, enter the

password.

❍ Enter the password (20 digits or less) if a password has been set at the relay station.

❍The only characters that can be used in the password are 0 through 9, , and #.

❍If you wish to correct the password, press the [No] key, and then enter the new number.

9Press the [Start] key to begin scanning and sending the fax.

Fax Transmission/Reception Methods Chapter 4

Fax Kit (FX-3) 4-15