Konica Minolta (FX-3) manual Specifying Administrative Settings ADMIN. Management Menu, Copy Track

Using the Utility Mode Chapter 5

5 5.4 Specifying Administrative Settings (“ADMIN. MANAGEMENT” Menu)

5.4Specifying Administrative Settings (“ADMIN. MANAGEMENT” Menu)

From the “ADMIN. MANAGEMENT” menu, various functions for controlling the use of the machine can be set. In order to set an “ADMIN. MANAGEMENT” function, the administrator access number must be entered.

“ADMIN. MANAGEMENT” menu:

No.	ADMIN. MANAGEMENT	Description
1	AUTO SHUT OFF	This function can be used to set whether or not the auto power-
		off function is performed.*
		• On a machine equipped with the fax option, the
		manufacturer’s default setting is “ENABLE”.
2	COPY TRACK	A maximum of 20 accounts can be specified in order to control
		the use of the machine.*
		• Turn on/off user management.
		• Register account access numbers.
		• Change/delete account access numbers.
		• Display/clear the total count for a specific account.
		• Clear the total counts for all accounts.
3	REMOTE MONITOR	This function can be used to set whether or not the machine can
		be accessed and the status of the machine can be checked
		from the service center.
		• The manufacturer’s default setting is “LIMITED”.
		• For details, consult with the service representative.

* For details on the settings, refer to the Di1611/Di2011 User Manual.

Note

The registering and setup of the administrator access number should be performed by the service representative. For details, contact the service representative.

The administrator of this machine should be sure not to lose the administrator access number.

5-8 Fax Kit (FX-3)