Konica Minolta (FX-3) manual Utility Mode

Using the Utility Mode Chapter 5

5 5.1 Utility Mode

5.1Utility Mode

There are sixteen menus in the Utility mode.

No.	Name	Description
1	MACHINE SETTING	Used to specify settings for the machine’s operating environment.*
2	PAPER SOURCE	Used to specify the size and type of paper loaded in Tray1. In addition,
	SETUP	auto tray switching can be enabled for each tray.
3	USER MANAGEMENT	For details on this menu, refer to the Di1611/Di2011 User Manual.
4	ADMIN. MANAGEMENT
5	COPY SETTING 1
6	COPY SETTING 2
7	FAX REGISTRATION	Used to specify the default setting for each fax function.
8	TX OPERATION	Used to specify the default setting for TX operation.
9	RX OPERATION	Used to specify the default setting for RX operation.
10	COMM. SETTING	Used to specify the default setting for communicating environment.
11	REPORTING	Used to specify the default setting for each report function.
12	INITIAL USER DATA	Used to specify setting for the initializing user data.
13	NETWORK SETTING	Available only if the optional Network Interface Card NC-6 is installed.
		For details, refer to the User Manual for the Network Interface Card
		(NC-6).
14	E-MAIL SETTING1	Available only if the optional Internet Fax & Network Scan Kit SU-6 is
		installed. For details, refer to the User Manual for the Internet Fax &
15	E-MAIL SETTING2
		Network Scan Kit (SU-6).
16	SCAN SETTING

*Only the description for specifying settings for the fax functions is described here. For details on the settings, refer to the Di1611/Di2011 User Manual.

Note

Depending on the installed options and specified installation region, some Utility mode functions cannot be set.

5-2 Fax Kit (FX-3)