Konica Minolta (FX-3) manual Calls Cannot Be Sent

7.2 When Faxing Is Not Performed Correctly			7
Calls Cannot Be Sent
Symptom	Possible Cause	Remedy
Nothing can be heard from the	The cord from the telephone is	Correctly connect the telephone
connected telephone.	not connected correctly to the	cord to the main unit.
	main unit.
	The telephone cord from the	Correctly connect the telephone
	wall jack is not connected	cord from the wall jack to the
	correctly to the main unit.	main unit.
	Transmitting.	Check again after the
		transmission is finished.
After dialing, the ringing cannot be	The telephone dialing system is	Correctly set the telephone
heard.	not set correctly.	dialing system. (p. 6-43)
After the [Speaker] key is pressed,	The monitoring volume is too	Increase the monitoring
it is difficult to hear the recipient/	low.	volume. (p. 6-44)
caller’s voice.
The ringing of the telephone is too	The ringer volume of the	Adjust the ringer volume of the
low (loud).	connected telephone is set too	connected telephone.
	low (loud).

Appendix Chapter 7

Fax Kit (FX-3) 7-5