6.3 Setting Up the Reception

Selecting the “RX OPERATION” menu

1Press the [Utility] key eight times. “RX OPERATION” appears.

6

2From the 10-Key Pad, press the key ([1] through [9]) for the “RX OPERATION” function that you wish to set.

The “RX OPERATION” functions are as follows:

1 MEMORY RX MODE

2 NO. of RINGS

3 REDUCTION RX

4 RX PRINT

5 RX MODE

6 FORWARD

7 FOOTER

8 SELECT TRAY

9 CLOSED NETWORK

Tip

If, at any time, you wish to quit setting/changing an “RX OPERATION” function, press the [No] key. When the message “STOP SETTING?” appears, press the [Yes] key to quit.

To exit the “RX OPERATION” menu, press the [Panel Reset] key. The main screen appears again.

Using the Utility Mode (Fax) Chapter 6

Fax Kit (FX-3)

6-35

Page 124
Image 124
Konica Minolta (FX-3) manual Selecting the RX Operation menu, Tip