Konica Minolta (FX-3) manual To set the Remote Monitor function

Using the Utility Mode Chapter 5

5 5.4 Specifying Administrative Settings (“ADMIN. MANAGEMENT” Menu)

To set the “REMOTE MONITOR” function

1Select the “ADMIN. MANAGEMENT” menu.

❍ Refer to “To select the

“ADMIN. MANAGEMENT” menu” on page 5-9.

2Press the [3] key from the 10-Key Pad to select “REMOTE MONITOR”.

❍Using the 10-Key Pad, enter the 6-digit administrator

access number, and then press the [Yes] key.

3 Using the [ Ö ] and [Ö] keys, select

“LIMITED”, “FULL” or “OFF”, and then press the [Yes] key.

❍If “LIMITED” or “OFF” was selected, the “ADMIN. MANAGEMENT” menu appears again.

❍If “FULL” was selected, a screen appears, allowing you to enter the password.

4 Using the 10-Key Pad, enter the 4- digit password, and then press the [Yes] key.

The “ADMIN. MANAGEMENT” menu appears again.

5-10 Fax Kit (FX-3)