Konica Minolta (FX-3) manual To change/delete a programmed broadcast transmission

Using the Utility Mode (Fax) Chapter 6

6 6.1 Setting Up the Fax Registration

❍“To fax using mailbox transmission” on page 4-12

❍“To receive a fax using polling reception” on page 4-24

❍“To fax using relay initiation transmission” on page 4-14

The settings are registered.

6To specify other program dialing settings, repeat steps 3 through 5.

7Press the [No] key to finish

programming.

The “FAX REGISTRATION” menu appears again.

To change/delete a programmed broadcast transmission

1Select the “FAX REGISTRATION”.

❍ Refer to “Selecting the “FAX REGISTRATION” menu” on page 6-3.

2Press the [4] key from the 10-Key

Pad to select “PROGRAM DIAL”.

3Press the one-touch dial key ([24] through [27]) programmed with the

broadcast transmission that you wish to change or delete.

4Press the [No] key.

5 Using the [	Ö	] and [Ö] keys, select
either “EDIT” or “DELETE”, and
then press the [Yes] key.
❍ If “EDIT” was selected, the
specified recipients are

displayed in order. (Continue with step 6.)

❍ If “DELETE” was selected, the program dialing settings are deleted and the “SELECT REGIST. KEY” appears again.

6-16 Fax Kit (FX-3)