Konica Minolta (FX-3) manual To change the batch transmission setting

Using the Utility Mode (Fax) Chapter 6

6 6.1 Setting Up the Fax Registration

4Using the 10-Key Pad, enter the desired transmission time, and then press the [Yes] key.

5Press the [No] key to return to the

“FAX REGISTRATION” menu.

To change the batch transmission setting

1Select the “FAX REGISTRATION”.

❍ Refer to “Selecting the “FAX REGISTRATION” menu” on page 6-3.

2Press the [5] key from the 10-Key

Pad to select “BATCH TX”.

3Press the one-touch dial key programmed with the batch

transmission setting that you wish to change.

4Press the [No] key, and then use the 10-Key Pad to enter the new transmission time.

5When you are finished making changes, press the [Yes] key.

6-24 Fax Kit (FX-3)