Konica Minolta (FX-3) manual Setting Up the Transmission, Selecting the TX Operation menu

6.2 Setting Up the Transmission 6

6.2Setting Up the Transmission

From the “TX OPERATION” menu, various functions for sending faxes can be set.

No.	TX OPERATION	Characteristic/Description
1	SCAN CONTRAST	This function can be used to set the default scanning contrast level to one
		of five settings between “LIGHT” and “DARK”.
		For dark-colored paper (media), select a setting towards “LIGHT”. For
		faint or colored text, select a setting toward “DARK”.
2	RESOLUTION	This function can be used to set the default scanning resolution (image
		quality) to one of the following: “Standard”, “Fine”, “Super Fine”, “Half
		Tone + Standard”, “Half Tone + Fine” or “Half Tone + Super Fine”.
		• The manufacturer’s default setting is “Standard”.
3	DEFAULT TX	This function can be used to set the default transmission mode to
		“MEM.TX” or “ADF TX”.
		MEM. TX: memory transmission
		ADF TX: direct transmission
		• The manufacturer’s default setting is “MEM.TX”.
4	HEADER	This function can be used to set the default setting (“ON” or “OFF”) for
		adding the header (date sent, sender’s name and fax number, etc.) when
		sending faxes.
		This function is not available in the United States.
		• The manufacturer’s default setting is “ON”.

Selecting the “TX OPERATION” menu

1Press the [Utility] key seven times.

“TX OPERATION” appears.

2From the 10-Key Pad, press the key ([1] through [4]) for the “TX OPERATION” function that you wish to set.

❍The “TX OPERATION” functions are as follows:

1 SCAN CONTRAST

2 RESOLUTION

3 DEFAULT TX

4 HEADER

Tip

If, at any time, you wish to quit setting a “TX OPERATION” function, press the [No] key. When the message “STOP SETTING?” appears, press the [Yes] key to quit.

Using the Utility Mode (Fax) Chapter 6

Fax Kit (FX-3) 6-31