4.1 Transmission Methods | 4 | |
|
|
|
5Press the [Memory TX] key, and then check that the Memory TX lamp lights up.
✎
Note
If the Memory TX lamp is not lit, the direct transmission is selected.
6Press the [Start] key to begin scanning and sending the fax.
❍To stop the transmission, press the [Stop] key, and then press the [Yes] key in the next screen that appears.
Once transmission is finished, a beep is sounded.
If the fax could not be sent, the transmission result report is printed (p.
Direct Transmission
If the Memory TX lamp is not lit, the direct transmission is selected. One page of the document at a time can be scanned, according to the transmission status. This ensures that even documents with many pages can be sent.
✎
Note
When faxing using direct transmission, the document should be loaded into the Automatic Document Feeder. Transmission is not possible by positioning the document on the Original Glass.
If direct transmission is specified while a fax is being sent or received, the transmission will be queued.
With direct transmission, multiple recipients cannot be specified.
Direct transmission and timer transmission cannot be performed at the same time.
Fax Transmission/Reception Methods Chapter 4
Fax Kit |
