4.1 Transmission Methods

To send a fax manually

1Load the document into the Automatic Document Feeder.

2If necessary, change the “Resolution” setting (p. 3-11).

3Pick up the telephone receiver.

Check that the dial tone can be heard.

4

4Specify the fax number of the recipient.

Use the telephone to dial the fax number.

The fax number of the recipient can also specified using the keys in the control panel of this machine (p. 3-2).

5After finishing talking on the phone, the recipient should press the necessary key to start receiving the fax.

Once the recipient’s fax machine is ready, a beep is sounded.

6Press the [Start] key to begin

scanning and sending the fax.

7Replace the telephone receiver.

To stop the transmission, press the [Stop] key, and then press the [Yes] key in the next screen that appears.

Tip

If the [Speaker] key is pressed instead of picking up the telephone receiver, the speaker can be used for manual transmission in the same way as described above.

Fax Transmission/Reception Methods Chapter 4

Fax Kit (FX-3)

4-5

Page 56
Image 56
Konica Minolta (FX-3) To send a fax manually