Konica Minolta (FX-3) manual Specifying F codes When sending faxes, Programming F codes

Fax Transmission/Reception Methods Chapter 4

4 4.2 Reception Methods

Specifying F codes

When sending faxes

F codes can be specified when the 10-Key Pad is being used to enter the fax number of a recipient while sending a fax.

1Using the 10-Key Pad, enter the

fax number of the recipient.

2Press the [▼] key, and then use

the 10-Key Pad to enter the SUB.

❍ A number up to 20 digits long can be entered for the SUB.

❍To enter an SID, continue with step 3.

❍If an SID will not be entered, continue with step 4.

3Press the [▼] key, and then use

the 10-Key Pad to enter the SID.

❍ A number up to 20 digits long can be entered for the SID.

4Press the [Start] key to begin scanning and sending the fax.

Programming F codes

F codes can be specified when programming one-touch dial keys or speed dial numbers.

For details on programming F codes, refer to “Setting Up the Fax Registration” on page 6-2in “6 Using the Utility Mode (Fax)”.

4-28 Fax Kit (FX-3)