6

6.1 Setting Up the Fax Registration

To change/delete a programmed speed dial number

1Select the “FAX REGISTRATION”.

Refer to “Selecting the “FAX REGISTRATION” menu” on page 6-3.

2Press the [2] key from the 10-Key

Pad to select “SPEED DIAL”.

3Using the 10-Key Pad, enter the speed dial number that you wish to change or delete.

4Press the [No] key.

Using the Utility Mode (Fax) Chapter 6

5 Using the [

Ö

] and [Ö] keys, select

either “EDIT” or “DELETE”, and

then press the [Yes] key.

If “EDIT” was selected, the

name is displayed. (Continue

with step 6.)

If “DELETE” was selected, the settings programmed for the speed dial number are deleted and the speed dial input screen appears again.

If you try to change the settings for a speed dial number used in group dialing or program dialing, a confirmation message appears, asking whether or not to change the corresponding settings programmed in group dialing or program dialing.

If the [Yes] key is pressed, the corresponding settings programmed in group dialing or program dialing are changed.

If the [No] key is pressed, the corresponding settings programmed in group dialing or program dialing are deleted.

If a speed dial number used in group dialing or program dialing is deleted, it is also deleted from the corresponding group dialing or program dialing.

6-10

Fax Kit (FX-3)

Page 99
Image 99
Konica Minolta (FX-3) manual To change/delete a programmed speed dial number