Konica Minolta (FX-3) manual Setting Up One-Touch Dialing ONE-TOUCH Dial function

2 Press the [1] key from the 10-Key Pad to select “ONE-TOUCH DIAL”.

3 Press the one-touch dial key that you wish to program.

Using the Utility Mode (Fax) Chapter 6

6		6.1 Setting Up the Fax Registration
	Setting Up One-Touch Dialing (“ONE-TOUCH DIAL” function)

If the one-touch dial keys are programmed with fax numbers, the recipient can be specified easily and accurately without the need to manually enter the number using the 10-Key Pad.

A maximum of 27 settings can be programmed.

To program a one-touch dial key

1Select the “FAX REGISTRATION”.

❍ Refer to “Selecting the “FAX REGISTRATION” menu” on page 6-3.

4	Enter the name of the
	programmed number.
	❍ For details on entering text,
	refer to “Entering Text” on
	page 2-9.
	❍ Text up to 20 characters long can be entered for the name.
5	Press the [Yes] key.

6 Using the 10-Key Pad, enter the fax number of the recipient.

❍ The fax number can contain a maximum of 30 digits.

For details on the characters that can be entered. Refer to “To fax by entering the fax number directly using the 10-Key Pad” on page 3-2.

❍ To enter a SUB, continue with step 7.

❍ If a SUB will not be entered, press the [Yes] key after entering the fax number, and then skip to step 9.

❍ If you wish to change the fax number, press the [No] key, and then enter the correct number.

❍ For details on F codes (SUB and SID), refer to “Using F codes” on page 4-26.

6-4 Fax Kit (FX-3)