7.4 PageScope Light

7

 

 

 

Remote Status Monitoring

Check the details of machine trays, information about consumables, or the total number of prints

Check the status of jobs that are being printed, or held in the print queue (Jobs can also be deleted if you have logged in to the Administrator mode.)

System Requirements

PageScope Light can be used in the following system environments.

OS

Windows 95 (OSR 2.5), Windows 98, Windows 98 SE, Windows ME,

 

Windows NT 4.0, Windows 2000, or Windows XP

Browser

Microsoft Internet Explorer 4.0 or later

 

Netscape Navigator 4 or later

Accessing PageScope Light

PageScope Light is accessed directly using a Web browser.

1Start up your Web browser.

2Enter the IP address of the machine into the URL box, and then press the [Enter] key.

http://<machine_IP_address>/

(Example) If the machine IP address is 192.168.0.10, enter: http://192.168.0.10/

3The PageScope Light screen appears.

Note

In order to access PageScope Light, an IP address must be assigned to the machine.

Using PageScope Light

PageScope Light is used in the same way as other Internet Web pages. Click on links in the page to jump to that page, and use the [Back] and [Next] buttons to navigate through pages that have already been loaded.

Appendix Chapter 7

Fax Kit (FX-3)

7-9

Page 152
Image 152
Konica Minolta (FX-3) manual System Requirements, Accessing PageScope Light, Http//machineIPaddress, Using PageScope Light