6.4 Settings Up the Communication | 6 | |
|
|
|
6.4Settings Up the Communication
From the “COMM.SETTING” menu, various functions are available for specifying communication settings.
No. | COMM.SETTING | Characteristic/Description |
1 | TONE/PULSE | This function can be used to specify the dialing system. If this function is |
|
| not correctly set to the type of dialing system used, faxes cannot be sent. |
|
| Select the correct setting after checking which type of dialing system is |
|
| used by your telephone line. |
|
|
|
2 | LINE MONITOR | This function can be used to set the volume when monitoring |
|
| communication to “HIGH”, “LOW” or “OFF”. |
|
| • The manufacturer’s default setting is “LOW”. |
|
|
|
3 | PSTN/PBX | This function can be used to set whether the connected telephone wiring |
|
| is a public switched telephone network (PSTN) or a private branch |
|
| exchange (PBX). |
|
| For a PBX system, the outside line access number (or extension number) |
|
| must be specified. |
|
|
|
*By installing the optional Network Interface Card, settings can also be specified from the network tool PageScope Light. (p.
Specifying the Setting for “TONE/PULSE”
There are two types of telephone dialing systems: tone dialing (PB) and pulse dialing (DP10pps or DP20pps). Faxes cannot be sent if this machine is not set to the system used by your telephone line. Select the correct setting after checking which type of dialing system is used.
To specify the telephone dialing system
1Press the [Utility] key nine times.
“COMM. SETTING” appears.
2Press the [1] key from the
Pad to select “TONE/PULSE”.
Using the Utility Mode (Fax) Chapter 6
Fax Kit |
